- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Differences between grounds and work leads in welding
- By Paul Cameron
- Updated February 8, 2024
- November 16, 2015
- Article
- Arc Welding
Q: I am writing this in regards to an article you wrote last year about grounding and grounds (“Achieving a good work lead connection,” Practical Welding Today, July/August 2014, p. 58).
You mentioned that grounding to a structure should not be used if at all possible. My question is this: If OSHA regulations state that it is OK to ground to structures, why say no to this?
Any help or information would be greatly appreciated. Thank you.
A: Yours is the perfect example of how many folks use the terms ground and work lead interchangeably. This is wrong and can create a dangerous situation.
Work Leads Explained
Common welding power sources have a positive (+) stud and a negative (-) stud. You attach a cable leading to the electrode (a wire feeder, a shielded-metal arc welding stinger, or a gas tungsten arc welding torch) to one and connect a cable leading to a work-lead clamp to the other. The polarity required determines if the work lead runs from the + or - stud.
In the article you’re referencing I state, "…the work lead does not ground anything." When you’re installing welding equipment, that statement is critical to remember. OSHA requires that your equipment be grounded to protect people from electric shock. The way equipment is grounded has nothing to do with the + or - stud on the front of the welding machine.
Weld Grounding Explained
Grounding is accomplished through the permanently attached power connection supplying the machine (the plug), or by a separate clamp and wire connecting the case or frame of the machine to ground (like the building). Sometimes both the plug and one of these wire connections is used. Again, they have nothing to do with the + or - stud on the machine.
ANSI Z49.1, Safety in Welding, Cutting, and Allied Processes requires that the work table also be grounded. This is accomplished with a cable connected to the table or positioner, from a driven rod or often the building. Again I clarify, this has nothing to do with the + or - studs.
When using the term ground, we are talking about protecting people and equipment. You would be much better off referring to the leads coming off a power source as an electrode lead and a work lead, or a positive lead and a negative lead, but neither is ever considered to be a ground.
About the Author
Paul Cameron
Braun Intertec
4210 Highway 14 East
Rochester, MN 55904
About the Publication
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 03/26/2024
- Running Time:
- 67:51
This week on The Fabricator Podcast, Jason Becker, host of the Arc Junkies Podcast and owner of Underground...
- Trending Articles
A welding instructor’s career path to working with metal
The importance of welding procedure specification (WPS)
Urban Steel Rockstars festival will highlight welding and steel industry
Keys to adopting welding automation successfully
Sensors use AI to assist robotic weld grinding
- Industry Events
Coil Processing Workshop & Tours
- April 2 - 3, 2024
- Corpus Christi, TX
GOLF4MFG South
- April 15, 2024
- Charlotte, NC
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY