- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Spin city
Considering a rotary weld positioner? Look around for the full story
- By Amanda Carlson
- March 11, 2008
- Article
- Arc Welding
It's easy to overlook equipment used to position a workpiece for welding, but turn for turn these machines make welding circular assemblies easier on welders. Whether for a short or long production run, a large assembly with a unique geometry, or a small circular piece, weld positioners in many cases promote flat or square welding, provide an ergonomic welding environment, and increase welder productivity.
Practical Welding Today spoke with two rotary weld positioner manufacturers to get a better idea as to what these units offer job shops.
Suggestion No. 1: Consider
The premise behind rotary positioning equipment is simple: Move the part, not the welder. Regardless of the size of the workpiece, welders can stay in one spot versus walking to where the weld needs to be laid, said Tom Rankin, vice president and general manager, Jetline Engineering, Irvine, Calif. Jetline manufactures positioners with load capacities from 75 to 500 lbs.
"Say a part is a 3-foot piece of stainless. What commonly happens is the welder will have to weld, walk a little bit, weld, and walk a little bit more to get around the part. If it's on a positioner, the welder sits, has a brace for his arm, pushes a foot pedal, and rotates the positioner so he can keep on welding. The benefit for the employer is an increase in productivity," Rankin said.
Keith Honhart, vice president of Atlas Welding Accessories Inc., Troy, Mich., which offers positioners in 100-, 200-, and 500-lb. load capacities, said rotary positioners can aid in the welding of any assembly that has a circular feature, and can fit in short-run or long production environments.
"If it's millions of parts, then I think you'd probably want to find something different. However, we have customers out there who are welding on these things every day and sometimes it's the same job for an entire month," Honhart said.
Many positioners have a tilting base that allows for vertical welding of at least 90 degrees. A foot pedal almost always comes standard to initiate rotation in either the forward or the reverse direction. For manual welding, a bracelike arm rest supports the handle of any hand-held welding device to help relieve arm and hand strain and to help the welder lay a steady bead.
"The welder wouldn't be carrying the weight of the gun at that point. It's like shooting a rifle from a bench as opposed to off-hand," Honhart said.
The weight of a workpiece must not exceed a machine's specified load capacity. Rankin said users must remember to take into consideration not only the weight of the part, but the weight of the tooling used to hold the part.
Suggestion No. 2: Determine Load Capacities, RPM
After determining the load capacity, users must then calculate the necessary revolutions per minute (RPM) for the job. Honhart refers customers to a simple formula that will help them target the appropriate RPM according to workpiece size. First calculate the welding speed in inches per minute (IPM). To do so, Honhart recommends running a test bead for 15 seconds and multiplying the number by 4. If GMAW is used, keep in mind that wire feed speed does not indicate how fast the arc passes over the weldment. Then divide the IPM by the circumference of the part.
"The larger the part diameter, the slower you have to turn the machine," Honhart said.
Honhart suggests users find a machine with a speed range that will accommodate an increase or decrease in workpiece size.
"Speed ranges and RPMs can vary from job to job depending on the speed of the arc and the circumference of the part."
Suggestion No. 3: Consider Necessary Accessories
While standard workholding accessories are made available by most positioner manufacturers, Honhart has found that many fabrication shops build their own workholding fixtures to accommodate their jobs, and some, he admits, are quite clever. For quick part setup and removal, Honhart suggests building a fixture for each part on a base plate that can be quickly attached and removed from the positioner.
For users positioning multiple jobs with differing workpiece diameters on one machine, units with an LED readout eliminates the guesswork involved in determining RPM after the job is set up originally.
"Typically by trial and error they would have to figure out the speed. With a digital readout on the machine, they can see the optimal rotation speed and record the RPM for the next time the job is set up," Honhart said.
About the Author
Amanda Carlson
2135 Point Blvd
Elgin, IL 60123
815-227-8260
Amanda Carlson was named as the editor for The WELDER in January 2017. She is responsible for coordinating and writing or editing all of the magazine’s editorial content. Before joining The WELDER, Amanda was a news editor for two years, coordinating and editing all product and industry news items for several publications and thefabricator.com.
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Sheffield Forgemasters makes global leap in welding technology
ESAB unveils Texas facility renovation
Engine-driven welding machines include integrated air compressors
The impact of sine and square waves in aluminum AC welding, Part I
Compact weld camera monitors TIG, plasma processes
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI