Technical Liaison Manager
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Consumables Corner: Not sure what metal you’re welding? Here are some tips
How welders can better identify unknown metals
- By David Meyer and Rob Koltz
- June 9, 2021
- Article
- Consumables
Q: My work involves performing machine shop welds and repairing machinery and structures in the field. I almost never have the benefit of being told what type of metal I’m welding. Can you please provide some guidance on how I might determine what type and grade of metal I am working with?
A: The best advice I can give is if you don’t know what it is, don’t try to weld it. This especially applies to critical parts for which failure can cause injury or death.
Welding on some metals using welding procedures that are not appropriate can cause defects in the base metal, the weld, or both.
When you’re asked to weld an unidentified material, how can you determine what it is? First, you should be able to narrow down the possibilities using a basic evaluation. Look at the surface of the material and see how heavy it is. This should allow you to put the material into the broad categories, such as carbon or low-alloy ferrous material, stainless steel or nickel alloy, or aluminum alloy. Evaluating the area where you’ll need to make a weld can also provide you with important clues. Is there evidence that the part was welded during original manufacture? If so, that is a good indicator that the material is weldable. Is there evidence that a previous weld repair was attempted? If previous weld repairs have failed, this is a red flag telling you to be very sure of what you are working with before attempting a new repair.
If you are doing a repair on a piece of equipment, you could call the original manufacturer to ask what material was used. Some items usually are made from a certain material. For example, aluminum handrails typically are made using grade 6061. Doing a little research on materials commonly used to make the item to be welded can help you narrow down your options.
Since you work with a machine shop, you should be able to get some very good information on the material from the machinists. If it was new material that they machined, the machinist may know exactly what it is. They can give you some good information on the material based on its machining characteristic. You should be able to estimate the hardness of a steel based on the feed rate and speed used in the machining process. The way machining chips form also provides helpful information. You should avoid welding steels that produce small chips, as these are likely to be a free machining grade that is prone to hot cracking when welded.
Spark testing on steel and cast iron can give you a general idea on how much carbon the material contains. Chemical spot testing can also determine if specific alloying elements are present.
Chemical analysis will provide some of the best information to help identify the material grade. In many cases, you can submit machining chips from the material for analysis. If machining chips are not available, if possible remove a small piece of the material to submit for analysis—approximately 1-in. square. Chemical analysis of metals is available from most testing labs and in many cases costs less than $200.
The bottom line is that spending some time and maybe a little money to get a very good idea of what material you will be welding is important if you want to make a repair that is safe and will last.
About the Authors
Rob Koltz
Application Engineer
411 S. Ebenezer Rd.
Florence, 29501
636-485-2253
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Sheffield Forgemasters makes global leap in welding technology
Welding student from Utah to represent the U.S. at WorldSkills 2024
Lincoln Electric announces executive appointments
Engine-driven welding machines include integrated air compressors
ESAB unveils Texas facility renovation
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI