- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Phygen Inc.
1400 Marshall St. N.E.
Minneapolis, MN 55413
Phone: 888-749-4361
Fax: 612-331-4230
Sales Contact
Chuck Cathcart
Sale Manger/Phygen
Email: tech@phygen.com
Sales: 612-331-4224
Toll-free: 888-749-4361
Recent Content on The Fabricator for Phygen Inc.
- From The Fabricator
Tooling coating extends die life, reduces die rework
- Apr 10, 2007
- Bending and Forming
- Article
Glacier Vandervell's Bearing Group, a division of Dana, manufactures bearing components—bushings and thrust washers—for the automotive industry. It uses about 40 alloys and encounters many abrasion problems in its stamping operations, especially those involving aluminum. Its die coatings were not satisfactory because the heat used to apply the coatings would cause many of its dies to warp. It switched to FortiPhy™, a coating provided by Phygen Inc., and the tools now warp less and last longer.
- From The Fabricator
High-performance coating helps stamper fight downtime
- Dec 7, 2004
- Bending and Forming
- Article
Depending on the severity of the application, some stamping dies require frequent reconditioning or recoating. However, some coating processes are done at such high temperatures that the dies become distorted and unuseable, requiring further regrinding. Omni Mfg. encountered this problem in stamping a heavy-duty hinge. It then discovered FortiPhy UltraEndurance™ from Phygen Inc., which increased the hit count on its dies from 20,000 to 200,000 between recoatings. The coating is applied at a relatively low temperature, so distortion is not a factor.
Products/Services
- Tooling ServicesTooling Surface Treatment/Coating