Our Sites
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Manual Plasma Arc Cutting Power Source Buyers' Guide
Company | Model or Series | Input | Output | Duty Cycle |
Capacities, Recommended and Max. (Mild Steel) | Air Require- ments |
ArcStart Frequency |
Weight (Lbs.) |
|||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Volts | Phase | Hertz | Recommended | Maximum | |||||||||||||||||||||||||||||||||||||||||||||
1 | 3 | 50 | 60 | Voltage (Volts) |
Current (Amps) |
Power (kW) |
Percent | Temp. (C) |
Cutting Thickness (In.) |
Cutting Speed (IPM) |
Cutting Thickness (In.) |
Piercing Thickness (In.) |
Severing Thickness (In.) |
Pressure (PSI) |
Flow (CFM) |
Std. | High | ||||||||||||||||||||||||||||||||
Hypertherm Inc. Hanover, NH | |||||||||||||||||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax30 XP | 120-240 | 125 | 15-30 | 3.8 | 35 | 40 | .375 | 20 | .5 | .625 | 80 | 4 | 22 | |||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax30 AIR | 120-240 | 83 | 15-30 | 2.5 | 35 | 40 | .3125 | 20 | .375 | .625 | 30 | |||||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax45 XP | 200-240, 480 | 145 | 10-45 | 6.5 | 50 | 40 | .625 | 20 | .875 | .5 | 1.125 | 90 | 6.7 | 31 | ||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax65 | 200-600 | 139 | 20-65 | 9 | 50 | 40 | .75 | 20 | 1.0 | .625 | 1.25 | 85 | 6.7 | 64 | ||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax85 | 200-600 | 143 | 25-85 | 12.2 | 60 | 40 | 1.0 | 20 | 1.25 | .75 | 1.5 | 85 | 6.7 | 71 | ||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax105 | 200-600 | 160 | 30-105 | 16.8 | 70 | 40 | 1.25 | 20 | 1.5 | .875 | 2.0 | 75 | 7.7 | 100 | ||||||||||||||||||||||||||||||||||
Hypertherm Inc. | Powermax125 | 480, 600 | 175 | 30-125 | 21.9 | 100 | 40 | 1.5 | 18 | 1.75 | 1 | 2.25 | 85 | 9.2 | 106 | ||||||||||||||||||||||||||||||||||
Fastenal Winona, MN | |||||||||||||||||||||||||||||||||||||||||||||||||
Fastenal | Blackstone 230 | 230 | 230 | 40 | 35 | .375 | .375 | .25 | .25 | 60 | 4.5 | 21 | |||||||||||||||||||||||||||||||||||||
Miller Electric Mfg. Co. Appleton, WI | |||||||||||||||||||||||||||||||||||||||||||||||||
Miller Electric Mfg. Co. | Spectrum 375 X-TREME | 120/240 | 92 | 30 | 3.4 | 35 | 40 | 3/8 | 18 | .1875 | .625 | 90 | 5 | 19 | |||||||||||||||||||||||||||||||||||
Miller Electric Mfg. Co. | Spectrum 625 X-TREME | 120/240 | 140 | 40 | 6.5 | 60 | 40 | .625 | 13 | .3125 | .875 | 90 | 6 | 21 | |||||||||||||||||||||||||||||||||||
Miller Electric Mfg. Co. | Spectrum 875 | 208/230 | 140 | 60 | 9.8 | 50 | 40 | .875 | 15 | .4375 | 1.25 | 90 | 6.75 | 49 | |||||||||||||||||||||||||||||||||||
Miller Electric Mfg. Co. | Spectrum 875 Auto-Line | 208-575 | 140 | 60 | 9.7 | 40 | 40 | .875 | 15 | .4375 | 1.25 | 90 | 6.75 | 54 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics West Lebanon, NH | |||||||||||||||||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 40 | 110-240 | 15-40 | 6 | 40 | 40 | .5 | 20 | .5 | 1 | 90 | 2.3 | 22 | ||||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 58 | 208/230/480/600 | 60 | 6.2 | 40 | 40 | 1 | 20 | .625 | .5 | 1 | 75 | 6.7 | 43 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 60i | 208/230/480 | 60 | 15 | 50 | 50 | .75 | 20 | .75 | .75 | 1.5 | 90 | 6 | 37 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics | AirCut15C | 120 | 15 | 35 | .1875 | 20 | .125 | .1875 | .1875 | 29 | |||||||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 102 | 208/230/400/480/600 | 100 | 12 | 60 | 40 | 1 | 20 | 1 | .75 | 1.75 | 70 | 7.5 | 62 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 152 | 208/230/400/480/600 | 120 | 15.4 | 80 | 40 | 1.25 | 20 | 1.25 | 1 | 1.75 | 70 | 7.5 | 62 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics | Cutmaster 82 | 208/230/400/480/600 | 80 | 9 | 40 | 40 | .75 | 20 | .75 | .625 | 1.5 | 70 | 6.7 | 43 | |||||||||||||||||||||||||||||||||||
Thermal Dynamics | Drag-Gun Plus 35C | 230 | 35 | 35 | .5 | 20 | .5 | .125 | .5 | n/a | n/a | 76 | |||||||||||||||||||||||||||||||||||||
Thermal Dynamics | PAK 200i | 380/400/415/480 | 200 | 40 | 100 | 1.5 | 20 | 1.5 | 1.25 | 2.75 | n/a | n/a | 222 |