Marando Industries, Inc.
Full range of tube and pipe forming and finishing equipment
Marando Industries offers a full range of tube and pipe forming and finishing equipment. We specialize in straightening, cutting, facing, beveling, NDT, and bundling for diameters up to 24 in. For diameters over 24 in., we offer plate edge prep, pipe rolling, pipe forming, facing, beveling and hydro-testing for rolled and welded cans or line pipe applications. We can provide individual machines or complete plant floor solutions.
90 Water Street
Reading , PA 19605
Phone: 610-621-2536
Fax: 610-621-2536
Sales Contact
Richard Marando
Sales
Email: sales@marando-inc.com
Sales: 610-621-2536
Recent Content on The Fabricator for Marando Industries, Inc.
The emergence of Saudi America
Although oil extraction around the world has grown by 50 percent in the last 30 years, it was basically flat in North America until 2008. Higher oil prices have made tar sands oil economically viable, and new extraction techniques have been a boon to U.S. producers. Interviews with a variety of vendors in the forming and fabricating industry reveal the many trends that are driving changes in the equipment and supplies used in the petroleum business.
Forming presses designed for large-diameter line pipe
Graebener-Reika Inc. offers Graebener Maschinentechnik pipe forming presses for producing large-diameter line pipe used in pipeline and utility distribution systems. The presses are suited for producing pipes with increased yield points and large wall thickness-to-pipe-diameter ratios, where the...
Four-column hydroforming press designed for high-volume environments
Graebener-Reika Inc. has announced the availability of a new four-column hydroforming press through its parent company, Graebener Maschinentechnik. The system is suitable for high-volume environments, such as the automotive industry. The presses are available in closing forces from 800 to 5,000...
-
- From The Fabricator
Cold saw blade has teeth in enlarged center hole
Graebener-Reika Inc. offers the RingSaw™ line of cold saws for processing tube, pipe, bar, plate, and sheet metal. Instead of cutting with the OD of the blade, the saw puts teeth in the enlarged center hole. The electromechanical unit rotates the blade by turning the OD; the center hole is...
-
- From The Fabricator
Four-roll plate bender includes detachable supporting yoke
Graebener-Reika offers a four-roll plate bending machine which the company says is the first on the market to feature a detachable supporting yoke design that can be adjusted hydraulically to counteract the respective bending forces. Fabricators can process a variety of thicknesses up to 5.9 in....
Graebener-Reika establishes new headquarters in Pennsylvania
Graebener-Reika Inc., a provider of machinery for processing tube, pipe, bar, plate, and sheet metal, has announced the establishment of its technical and sales headquarters in Reading, Pa. The 12,000-sq.-ft. facility houses the company's engineering, sales, and service staff with on-site...
Cold sawing turned inside out
Cold sawing, widely used for cutting tubes, pipes, bars, and profiles for decades, has evolved steadily over time through advances in materials, coolants, coatings, tooth forms, and cemented carbides. However, new tube, pipe, bar, and profile materials are harder to cut than conventional materials, so some factors such as sawing speed and noise haven't improved much. A new machine and blade design has the potential to help fabricators substantially.
Scenes from Europe
Editor Eric Lundin recounts some of the product introductions and innovations seen at the TUBE expo in Düsseldorf, April 12-16, 2010.
Will tube and pipe industry have energy to continue expanding?
The current expansion in the tube and pipe industry isn't new, but it bears a close look nonetheless. Understanding the factors that are causing it and how manufacturers are reacting to it provide some guidance to the future of this trend.
Graebener Group Technologies appoints president
Graebener Group Technologies LLC, Napoleon, Ohio, a joint venture between Automatic Feed Company (AFCo), Graebener Maschinentechnik GmbH and REIKA GmbH, has announced the appointment of Richard A. Marando as president. In this position, Marando is responsible for supervising all company operations...