MS Fluid Technologies

What's Your Solution?

Synthetic, semi-synthetic and soluble oil solutions
Synthetic, semi-synthetic and soluble oil solutions for the metal forming, metalworking, and metal finishing industries.
MS Fluid Technologies, in operation for more than 40 years, is a global company headquartered in Indianapolis, Ind. formulating solutions for manufacturing. Drawing/stamping: A diverse line of fluids and dry-film products that facilitate optimum performance in metalforming operations. Eco Draw® HVE, was the first formally automotive approved synthetic forming lubricant. Today the technology is approved for use by branded, worldwide automobile manufacturers. The company's new multiphase performance stamping lubricant, Eco Draw® HVRG, is designed for use in forming ultra high-strength steel. • Coolants: Technology designed for all phases of metalworking—cutting, grinding, tapping, rollforming, sawing, tube rolling, tube bending, hydroforming and more. • Metal finishing: Post-process manufacturing technologies, including plating, paint pre-treatment, parts washing, cleaners, anti-rust agents and general job shop needs.

Recent Content on The Fabricator for MS Fluid Technologies

• 
• From The Fabricator

New lube gives the slip to stamper's slips, trips, and falls

• By Paul Bosler Jr.
• Oct 9, 2007
• Consumables
• Article

KI USA, a division of KI Japan, stamps and produces sub-assembly parts for Toyota, Honda, Nissan, and other "transplant" automotive OEMs. The stamper wanted to improve plant safety by reducing incidents of slips and falls. Petroleum-based stamping lubricants that had been used created a slippery environment at the press and other sites. Changing the stamping lubricant system to a synthetic lubricant from MS Fluid Technologies not only improved plant safety and appearance, it produced cost savings and reduced the plant's impact upon the environment.

• 
• From The Fabricator

Lubricant developments for forming high-strength steel

• By Paul Bosler Jr.
• Dec 12, 2006
• Bending and Forming
• Article

Forming lubricants always have been a critical component in the metal forming process, but the performance characteristics of these products are even more essential when working with HSS.