Product Highlight: Cutoff saw customizable for cutting superalloys
The model K20SW semiautomatic wet cutoff saw from Kalamazoo Industries Inc. can be customized to cut nearly any superalloy rapidly with a 20-in. abrasive wheel formulated for the alloy. The saw features an air-over-oil precise feed control with a 0 to 12-FPM feed rate, automatic end-of-cut head return, and manual stock feed.
Additional features include an air vise, cast-iron upper arm/trunnions, a 27- by 30-in. steel saw top, a heavy steel floor stand with tray-top for coolant collection, and a 1/3-HP coolant pump with 10-gal. reservoir and dual coolant hoses. A 15-HP TEFC, 220-/440-V, three-phase motor is standard, with higher-horsepower motors available as well as oscillation, enabling faster cutting without scorching.
Kalamazoo Industries Inc.
www.kalamazooindustries.com
About the Publication
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
