- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Another technology milestone
- By Eric Lundin
- July 10, 2013
On May 9, 1912, Air Commodore Charles Samson, a pilot in the Royal Navy, became the first pilot to take off from a moving ship. The final piece of the puzzle, and the trickiest one, was put into place on August 2, 1917. Squadron Commander Edwin Dunning, another Royal Navy pilot, became the first man to land a plane on a moving ship. The sheer danger of the feat was underscored a mere five days later when Dunning died during another attempt.
If all goes well today, July 10, 2013, will be another red-letter date in aviation history. The U.S. Navy has announced that it will attempt to land a drone on a carrier deck. This is actually two milestones at once.
First, it frees drones from terrestrial takeoffs and landings; when U.S. aircraft are launched from foreign bases, the U.S. military needs permission from the host country’s government. This isn’t usually a big problem, but shifting alliances and bureaucratic meddling occasionally throw a wrench into the plans.
This isn’t to suggest that today’s test flight will result in big changes right away. Carrier-based takeoffs and landings by drone aren’t expected to be commonplace until 2020. Still, it points to greater independence from fickle foreign governments in the not-too-distant future.
The other reason this is a milestone is that it allows a computer system to take over one of the most complex and terrifying tasks devised by man. Until today, it was always a pilot’s job to aim for a moving platform and set the airplane down without damaging it. This is next to impossible when the wind is negligible and the sea is calm and the ship is moving slowly. And some wind and waves and crank up the ship’s throttle, and it gets just a little closer to impossible.
Although some drones (Predators and Reapers) are controlled remotely by human pilots, today’s experiment involves an X-47B, which is run by an onboard computer system. The test is the result of countless hours of programming and literally thousands of simulations, and if successful, it will be a minor miracle of technology.
Today’s experimental landing comes fast on the heels of the Boeing 777 crash in San Francisco, which leads to a timely question: Will the day come when we turn the piloting duties for passenger aircraft over to an onboard computer system?
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Eric Lundin
2135 Point Blvd
Elgin, IL 60123
815-227-8262
Eric Lundin worked on The Tube & Pipe Journal from 2000 to 2022.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,