Coe ships servo feed to Four Star Tooling

Coe Press Equipment, Sterling Heights, Mich., has shipped and installed an 18-in. Series 2 servo feed to Four Star Tooling and Engineering, a manufacturer of clamps, baffles, brackets, flat springs, clips, washers, and wire forms, also of Sterling Heights.

The servo feed is designed to process 18-in.-wide coils of mild steel of up to 40,000-PSI yield in thicknesses from 0.020 to 0.156 in., depending on the material width. It can achieve a roll speed of 580 FPM with a feed accuracy of +/- 0.003 in.