- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Manufacturing technology orders grew in December, but market remains flat
- February 8, 2016
- News Release
- Shop Management
The U.S. Manufacturing Technology Orders (USMTO) report for December 2015 showed that order values grew 20.4 percent compared to the prior, according to AMT – The Association For Manufacturing Technology. For all of 2015, the year's total orders were down 17.4 percent compared to 2014.
While the month-to-month gain seemingly indicates an upturn for the manufacturing technology market, it is important to note that the average November-to-December gain since 2010 has been 22.4 percent - meaning that the end of 2015 came in below average.
“The fourth quarter turned out better than anticipated thanks to investment from the aerospace, automotive and consumer electronics industries, but the overall market will remain flat through the first three quarters of this year due to market forces like the strong dollar and low oil prices,” said AMT President Douglas K. Woods. “It’s typical for December orders to rise as many companies invest their yearend profits into new equipment, and technology builders and suppliers try to reduce their inventories with discounted products. This uptick in orders does not change our forecast for the year.”
December saw the second-highest monthly order totals in 2015, with the most orders coming in March – a time when companies are looking to lessen their tax liability for the April filing deadline by making investments in new equipment.
Equipment purchases for some industries, especially those related to defense, were helped by Congress’ passage of a two-year budget deal that temporarily lifts the automatic spending cuts known as “sequester,” ensuring that federal defense programs remain intact through 2017. More of a surprise was a surge in orders from the consumer electronics industry, which defies the logic that most electronics manufacturing largely happens outside the United States.
The overall market for manufacturing technology is likely to remain soft into the third quarter of 2016, but industry forecasts predict that orders for the overall year will finish ahead 3% compared to 2015, with much of the activity coming in the fourth quarter. September’s IMTS – The International Manufacturing Technology is anticipated to create a boost in sales later this year.
December 2015 manufacturing technology orders valued $401.16 million, compared to $511.10 million in December 2014, a decline of 21.5 percent. The total manufacturing technology order value for all of 2015 was $4,187.83 million, vs. $5,072.50 million in 2014. This data is a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.
The full report can be found here.
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,