UV lamp suitable for NDT inspection
Spectronics Corp. offers the Spectroline® UV-400 series SuperFlood™ UV lamp for fluorescent penetrant and magnetic particle inspection, parts degreasing inspections, and wash station inspections. A 400-W metal halide bulb, combined with tempered, heat-resistant, low-solarization UV filters, provides high intensity over a large area.
The UV-400A model has a concentrated-beam reflector to help ensure a nominal steady-state UV-A intensity of 8,000 µW/cm2 at lamp center, measured at 15 in. It irradiates an area as large as 16 by 10 in., producing a nominal steady-state UV-A irradiance of not less than 2,000 µW/cm2.
The UV-400B model has a broad-beam reflector to provide maximum uniformity of coverage over a large area. It has a nominal steady-state UV-A intensity of 5,000 µW/cm2 at lamp center, measured at 15 in. The lamp irradiates an area as wide as 27 by 15 in., producing a nominal steady-state UV-A irradiance of not less than 2,000 µW/cm2.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
Patrick Brunken, VP of Addison Machine Engineering, joins The Fabricator Podcast to talk about the tube and pipe...
