Marketing Manager, Metal Fabrication
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
7 effects of shielding gas
Blend composition makes a difference
- By W.F. Garth Stapon and Kevin Lyttle
- January 9, 2007
- Article
- Arc Welding
Although you probably know that shielding gas is essential in most welding procedure specifications, you may pay little attention when you're selecting it. A simple gas composition change can offer potential savings in seven key areas, particularly in gas metal arc welding (GMAW).
Shielding gas typically isn't considered to have much of an effect on the cost of a welding operation. Many welders don't fully understand the financial impact that shielding gas can have on the bottom-line cost of the welding operation.
Which shielding gas composition you choose for GMAW can affect your welding operation in seven key ways.
1. Filler Metal Deposition Rate and Efficiency
Shielding gas blends with high argon content generally result in high productivity. Placing the workpiece in the flat or horizontal welding position allows you to use spray transfer with these blends. Select shielding gas carefully: Wire feed rates and current levels are high.
Single-wire GMAW can exceed deposition rates of 15 pounds per hour at 100 percent duty cycle. Argon content should be 85 percent or more to accomplish spray transfer. In some cases, instead of using a conventional argon/carbon dioxide or argon/oxygen blend, using a helium-enhanced argon blend may increase weld metal deposition rates up to 15 percent.
Although helium costs more than argon, shielding gas typically comprises less than 5 percent of the total welding cost, making the addition of helium something to consider when choosing a shielding gas blend.
Electrode deposition efficiency is linked directly to the welding spatter level. High-argon blends typically produce the best results in spray transfer. Improved deposition efficiency also can be a function of choosing the right welding parameters. A nonoptimized system—in which any number of parameters, such as gas flow rate and voltage, aren't optimized—generally produces lower deposition efficiency and may contribute to increased postweld cleanup costs.
2. Spatter Control and Postweld Cleaning
Argon's low ionization potential results in improved arc stability which, in turn, helps eliminate spatter when you use conventional power supplies. Some recently developed power sources are designed to improve spatter with pure CO2 shielding gas. It's possible to reduce spatter even more and increase the operating window of these units by using argon-based shielding gases. You can increase the operating current and voltage by 10 percent or more while still maintaining spatter control.
If you use spray arc transfer, generally the argon level should be 85 percent or more. Pulsed spray transfer with a 95 percent argon blend typically will yield the lowest spatter levels when welding plain carbon steel. A three-part blend of argon, helium, and carbon dioxide can reduce weld spatter when joining galvanized steel or steel with some residual surface oil or scale.
In general, GMAW is a slag-free process, but slag islands still are common on the bead surface. Powder and paint won't adhere to these silicon deposits. Low shielding gas reactivity can help to reduce these surface residuals. If you're concerned about slag island buildup along the edge of the weld bead, work only with properly cleaned base material and use a blend containing at least 90 percent argon with no oxygen. Choosing filler metal carefully also will help limit island formations.
Postweld cleanup can increase cost, reduce your arc-on time, and decrease the welding operation's duty cycle. Because it reduces spatter, an optimal argon blend may help you reduce postweld grinding, which means you can dedicate more time to welding.
Color match typically is a concern when welding stainless steels. For the best color match, select a blend of argon or helium with low levels of oxygen or CO2 to minimize weld surface oxidation. Oxygen-free blends produce less weld metal discoloration. To further minimize discoloration, use a low operating current and a large gas nozzle with close nozzle-to-work distance to ensure good shielding gas coverage. When joining 300 series stainless steel, you can add a controlled amount of hydrogen—less than 5 percent—to lessen oxidation and therefore improve bead color and enhance productivity. If corrosion resistance is important, limit CO2 content to less than 5 percent.
3. Bead Profile and Overwelding
A CO2 shielded weld bead tends to have a convex shape, which contributes to overwelding; this increases welding cost. Argon-based blends offer good bead shape control, which can reduce overwelding. Because of the physical characteristics of a CO2 shielded arc and the weld puddle produced, CO2 can produce a convex bead shape. Argon blends tend to produce a flat bead face, which produces sufficient reinforcement but reduces overwelding.
Filler metal diameter also plays a critical role in optimizing bead shape. A large wire size can make it difficult to control the weld bead size. An oversized weld bead can increase welding costs by at least 50 percent. Choose your filler metal type and size based on the needs of your application.
4. Bead Penetration, Potential for Burn-through
When welding thin material—16- to 22-gauge—a gas blend's welding characteristics become important. One characteristic of pure CO2, for example, is that it results in increased weld pool energy when compared to an argon/ CO2 blend. By controlling the blend's CO2 content, you can control burn-through and increase welding productivity. Use argon/ CO2 blends in the 85 percent to 95 percent range to minimize burn-through.
Pure CO2 can help you achieve good weld penetration. The operating current, filler metal, and gas composition also affect the penetration profile. If you want deep penetration, use an argon blend with a high percentage of CO2—15 percent to 20 percent—or perhaps consider adding helium to broaden and deepen penetration. This also will contribute to better welding productivity.
5. Out-of-position Weldability
Shielding gases with greater reactivity, which use more CO2 or O2, will increase weld pool fluidity. For out-of-position work, this may force you to use slower wire feed rates, which will decrease productivity.
The type of metal transfer you choose also is critical when trying to improve out-of-position control. High-argon blends with low reactivity generally perform well.
6. Welding Fume Generation Rates
Many factors influence welding fume generation, including filler metal, base metal composition, operating parameters, and shielding gas.
High-argon blends are less reactive than pure CO2 and generally produce less welding fumes under similar operating conditions. But lower fume generation doesn't always equal lower exposure, so be sure to conduct measurements to ensure compliance with applicable permissible exposure limits.
7. Weld Metal Mechanical Properties
Since high-argon blends typically are less reactive than other blends, more alloying elements in the filler wire are transferred to the weld pool. This typically increases the weld strength. In all cases, consider your shielding gas when choosing a wire consumable so you know that the resulting weld meets the needs of your application.
The shielding gas you choose can affect many welding characteristics. Once you understand which properties are most important for your application, you can select the best blend for the job.
About the Authors
W.F. Garth Stapon
39 Old Ridgebury Road
Danbury, CT 06810
800-225-8247
Kevin Lyttle
Development Scientist
175 E. Park Drive
Tonawanda, NY 14150
716-879-7290
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
Aluminum MIG wires offer smooth feeding, reduced tangling
The role of flux in submerged arc welding performance
Three ESAB welding machines win Red Dot Awards for product design
Power source added to cobot welding system for simplified automation
Connecticut students compete in Maritime Welding Competition
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,