Products

Filter Content

Autodarkening welding helmet suitable for maintenance and construction workers, hobbyists

March 10, 2009

3M has introduced the 3M™ Speedglas™ 100 welding helmet and welding filter series. It is available in several graphic patterns or standard black.The helmet is suitable for maintenance or...

Continue Reading

Waterjet cutting machine available in two sizes features exposed tank for overhead loading

March 10, 2009

Jet Edge Inc. has introduced a large-format, midrail gantry waterjet system. It features a 21-ft. by 13-ft. work envelope with an exposed tank that accommodates overhead loading. It comes standard...

Continue Reading

Metal-cored wires suitable for robotic, hard automation applications

March 10, 2009

Lincoln Electric has added two new consumables to its line of metal-cored wires. The wires are suitable for single- and multiple-pass welds and are designed to achieve optimal performance in robotic...

Continue Reading

Metal-cored welding wire designed for HSLA steel welding applications

March 10, 2009

Hobart Brothers offers two gas-shielded, metal-cored welding wires designed for HSLA steel welding applications. Tri-Mark® Metalloy® Vantage™ D2 and Tri-Mark Metalloy 80D2 wires provide...

Continue Reading

Automated orbital welding system introduced

March 10, 2009

Gullco Intl. has introduced its Pipe KAT® welding system, which automates a variety of orbital welding applications. The system uses a variable-speed welding travel carriage with a maximum speed...

Continue Reading

GMAW package features new heavy-plate parameters for 5/8 in. and thicker

March 10, 2009

ESAB Welding & Cutting Products has introduced an industrial ready-to-weld GMAW package, the Migmaster® 275. Rated 275 amps at 40 percent duty cycle and 200 amps at continuous 100 percent duty...

Continue Reading

Nesting technology increases pressure washer pump seal life

March 10, 2009

Hotsy has added NESTechnology™ (Nested Seal Technology) to its high-pressure pumps, used in industrial-grade pressure washers.With this technology, the pump nests the seals of the pump's...

Continue Reading

New Grinder Control

March 1, 2009

Toyoda Machinery's SelectG is a universal grinder designed for flexible, precise, small-lot work. The grinder's newly developed CNC grinder control, the GC50, has been redesigned to improve the...

Continue Reading

Multi-Surface Grinder

March 1, 2009

Bryant Grinder, a division of Vermont Machine Tool Corporation, has introduced a new modular multi-surface grinding machine with extended flexibility to grind complex workpieces.The machine,...

Continue Reading

12-Pocket Automatic Tool Changer

March 1, 2009

Huffman Corporation has unveiled the new HS-225GC multi-axis grinding center with a 12-Pocket automatic tool changer (ATC).The ATC enables flexible solutions for a wide variety of complex parts...

Continue Reading

CNC Tool Grinding System

March 1, 2009

ANCA has recently introduced the MX7, a next-generation CNC grinding system designed for high flexibility and quick changeover to accommodate smaller batch sizes with high volume capability for...

Continue Reading

5-axis machining book includes CD

February 20, 2009

Publisher Industrial Press offers Secrets of 5-Axis Machining, by Karlo Apro.According to the publisher, the book is an unbiased, no-nonsense, to-the-point description of 5-axis machining that...

Continue Reading

Book offers tips, tricks for machinists, welders, fabricators

February 20, 2009

Metalworking Sink or Swim, by Tom Lipton, is a collection of tips, tricks, skills, and experiences for machinists, welders, and fabricators. It features shop-tested descriptions and illustrations of...

Continue Reading

Machinery handbook revised

February 20, 2009

Industrial Press has released the 28th edition of Machinery's Handbook, which provides mechanical and manufacturing engineers, designers, draftsmen, toolmakers, and machinists with basic to advanced...

Continue Reading

Machine Shop Trade Secretsfilled with experience-based knowledge

February 20, 2009

Industrial Press offers Machine Shop Trade Secrets, by James A. Harvey, an experienced machinist and plastic injection mold maker. The manual is intended to have users thinking and producing like...

Continue Reading