Products

Product releases on thefabricator.com represent the gateway to production efficiency for many metal fabricators. These write-ups cover cutting edge developments in automation, CAD/CAM software, finishing technology, folding equipment, laser cutting machines, machining technology, plasma cutting, power tools, press brakes, punching machines, saws, shop management software, stamping presses, tube and pipe fabrication equipment, waterjets, welding technology, and other areas of fabricating activity. Anyone interested in sending a product news release to thefabricator.com should send it to press_releases@thefabricator.com

Filter Content

Mobile GMAW systems suitable for medium-sized construction, various repair work - TheFabricator.com

Mobile GMAW systems suitable for medium-sized construction, various repair work

April 5, 2011

Kjellberg Finsterwalde offers the KJELLmig 180, 230, and K350 mobile GMAW units. They are designed for medium-sized steel construction companies and for use in vehicle repair work, agriculture, industry, and craft. Using argon or mixed gases, the units can weld unalloyed, low-alloyed, and...

Continue Reading


Portable end prep tool designed to remove simply from tube and not catch on burrs - TheFabricator.com

Portable end prep tool designed to remove simply from tube and not catch on burrs

April 5, 2011

Esco Tool’s Ground MILLHOG® is a right-angle-drive, air-powered, portable welding end prep tool that features a clamp rib assembly incorporating a captive internal band and smooth clamp ribs. The ID clamping tool removes simply from the tube, does not catch on burrs, and is unaffected...

Continue Reading


Slim safety door switches designed to fit in skinny spaces subject to water washdown cleaning - TheFabricator.com

Slim safety door switches designed to fit in skinny spaces subject to water washdown cleaning

April 5, 2011

Omron Scientific Technologies Inc. has introduced D4GS-N slim safety door switches. Measuring 0.67 in. wide and featuring IP67 protection, the tongue-actuated unit is designed to fit in skinny spaces subject to water washdown cleaning. A reversible design enables either front or rear mounting,...

Continue Reading


Feeder handles 0.050- to 0.125-in.-thick steel sheets from 20 to 44 in. wide, 60 to 70 in. long - TheFabricator.com

Feeder handles 0.050- to 0.125-in.-thick steel sheets from 20 to 44 in. wide, 60 to 70 in. long

April 5, 2011

The Union Tool Corp. has introduced the new Union Sheet Feeder, designed to destack, align, and feed steel sheets from 20 to 44 in. wide and 60 to 76 in. long with thicknesses of 0.050 to 0.125 in. The unit can feed up to five parts per minute and features a PLC with operator touchscreen...

Continue Reading

CNC ironworker has 30-in. plate and 8-in. angle shears

April 5, 2011

Trilogy Machinery Inc. has announced the recent sale of a Sunrise XY CNC ironworker. The 180-ton machine with 30-in. plate shear and 8-in. angle shear features a hydraulic plate shear hold-down, hydraulic punch stripper, pendant control, and interchangeable die blocks for up to 4 in. A...

Continue Reading


Single-point ground welding machine handles wire bundles of up to 0.79 sq. in. - TheFabricator.com

Single-point ground welding machine handles wire bundles of up to 0.79 sq. in.

April 5, 2011

Sonobond Ultrasonics has developed the SPG 2600 ultrasonic spot welding machine for manufacturing single-point ground terminals, which help solve the problem of electrical noise caused by today's intricate automobile systems. The unit's tooling is designed to gather as many as 18 wires into a...

Continue Reading

Welding nozzle rental program introduced

April 5, 2011

A new GMAW nozzle rental program has been introduced by WeldDaddy, a business unit of Secoa Technology. The Single & Tandem Annual Rental (STAR) program provides qualifying companies the option to rent self-cleaning PerfectArcs™ nozzles instead of buying them. A key component of the program...

Continue Reading

Electronic welding regulator helps improve gas coverage while reducing flow rates

April 4, 2011

Regula offers an electronic welding regulator that controls the flow of shielding gas used in GMAW and GTAW processes by regulating the gas flow proportionately to the amps being pulled by the welding machine. The regulator also pulses the gas flow through a patented valve that opens and closes 50...

Continue Reading


Software combines laser drilling, airflow measurement - TheFabricator.com

Software combines laser drilling, airflow measurement

April 4, 2011

FlowComp™, a closed-loop hardware and software feature that combines laser drilling with airflow measurement on Laserdyne 795 and 450 multiaxis laser systems, has been introduced by Prima Power North America. The feature has applications in both aerospace and land-based turbine engine...

Continue Reading


Four-roll plate rolling machine features simplified setup - TheFabricator.com

Four-roll plate rolling machine features simplified setup

April 4, 2011

Carell Corp. has introduced the HTH 20-150 four-roll, double-initial-pinch plate bending machine, which uses an automated work cycle for the production of cylindrical and radius segmental parts. Setup is simplified with the use of mechanical and electric limit devices. Autoloading and ejector...

Continue Reading

Inspection software, point cloud viewer allows data import from various measuring systems

April 4, 2011

Capture 3D has introduced GOM's new software release, GOM Inspect. The free software, available for download at www.gom.com/3d-software/gom-inspect.html, allows users to import scan data from various types of measuring systems with several point cloud and inspection functionalities. Mesh...

Continue Reading


Industrial welding gloves available in multiple types, grades of leather for different applications - TheFabricator.com

Industrial welding gloves available in multiple types, grades of leather for different applications

April 4, 2011

Miller Electric Mfg. Co. has added a new line of industrial gloves to its Arc Armor™ welding protection products. The gloves are designed to endure long-term, repetitive abuse while providing comfort and dexterity, the company reports. Glove design is segmented into three categories:...

Continue Reading

Self-propelled trailers introduced

March 29, 2011

The Wheelift Systems Group of Doerfer Companies has introduced its self-propelled trailers in capacities to 100 tons and more. The trailers are suitable for in-plant operation in congested, confined areas and narrow intersecting aisles. Features include remote control operation, low-profile...

Continue Reading

Extended nose grinder finishes, polishes hard-to-access fillet welds

March 29, 2011

Metabo Corp. offers the KNSE 12-150 fillet weld grinder for finishing metals, including stainless steel. The extended-nose grinder is used for finishing and polishing hard-to-access fillet welds typically found on handrails and inside welds on enclosed areas. The 6.6-lb. unit has a flat design....

Continue Reading

Water-soluble oil resists bacteria and fungus

March 29, 2011

ITW Rocol North America offers Rustlick's Ultracut Aero, a water-soluble oil designed for use with metals such as titanium, aluminum, INCONEL® alloy, and stainless steel. The antimicrobial fluid resists bacteria and fungus. The nonchlorinated coolant also has superior boundary lubricants and...

Continue Reading