Cutting and Weld Prep Products

A good weld starts with good preparation. This is the place to find information on equipment for beveling, deburring, grinding, and sanding.

Filter Content
Beveling machine bevels steel pipe 6.25 in. and larger -

Beveling machine bevels steel pipe 6.25 in. and larger

August 9, 2012

CS Unitec's SKF 25 beveling machine provides quick, simplified preparation of weld seams and bevels steel pipes 6.25 in. dia. and larger. It is suitable for use on steel, stainless steel, aluminum, and nonferrous metals. The machine has a continuously adjustable angle of 15 to 60 degrees and a...

Continue Reading

Abrasive wheel delivers both cutting, grinding -

Abrasive wheel delivers both cutting, grinding

July 19, 2012

Metabo Corp. offers the Combinator combined cutting and grinding wheel. It eliminates the need to change abrasive wheels during cutting and grinding applications. The wheel is suitable for cutting, deburring, and light grinding. With three layers of fiberglass measuring 0.078 in. thick, it cuts...

Continue Reading

Automatic coping robot is first of its kind

April 19, 2012

The first of its kind, Daito U.S.A. Inc.'s new CRII coping robot offers coping, piece marking, scribing, and cutting capabilities, all from one machine. Functioning automatically, the unit saves time and eliminates the need for manual marking and finishing. Featuring a six-axis robotic arm, the...

Continue Reading

Portable end prep tool speeds on-site pipeline construction -

Portable end prep tool speeds on-site pipeline construction

March 6, 2012

Esco Tool offers the MILLLHOG® Dictator, a portable, ID clamping, welding end prep tool for dry-cut beveling of heavy-wall pipe. The tool features extra-wide clamps for rigidly mounting inside the pipe and incorporates hardened steel contact points. According to the company, it produces a...

Continue Reading

Controller retrofits onto cutting gantries -

Controller retrofits onto cutting gantries

February 16, 2012

ESAB Cutting Systems has introduced the Vision 51R controller for retrofit onto cutting gantries. It can control up to four process tools in a variety of processes, including plasma, oxyfuel, and marking. The controller is designed to replace single box controls from the Vision 4 series,...

Continue Reading

Thin cutoff wheels suitable for cutting steel sheet, tube stock

November 27, 2011

Pferd offers 0.045-in.-thick T-SGP cutoff wheels in diameters of 4.5, 5, and 6 in. Suitable for cutting steel sheet and tube stock, the flat wheels feature a 0.875-in. arbor hole and offer low vibration and smooth cutting performance, according to the company. The new wheel is part of the...

Continue Reading

Portable end prep tool designed to remove simply from tube and not catch on burrs -

Portable end prep tool designed to remove simply from tube and not catch on burrs

April 5, 2011

Esco Tool’s Ground MILLHOG® is a right-angle-drive, air-powered, portable welding end prep tool that features a clamp rib assembly incorporating a captive internal band and smooth clamp ribs. The ID clamping tool removes simply from the tube, does not catch on burrs, and is unaffected...

Continue Reading

Fiber cutting disks allow constant supply of new cutting edges -

Fiber cutting disks allow constant supply of new cutting edges

March 21, 2011

Saint-Gobain Abrasives has introduced Norton NorZon® BlueFire™ F826 fiber disks for use on stainless, superalloys, steel cast iron, and high-pressure applications. They feature a blend of patented zirconia alumina and ceramic alumina abrasive with a microfracturing capability that...

Continue Reading

Automated metal removal system facilitates uniform U or J grooves in weld joint preparation

April 6, 2010

The Arcair-Matic® N6000 metal removal system from Thermadyne® Industries is designed for automated gouging of steels and other metals with the air carbon arc process. The system is suited for...

Continue Reading

Cutting wheel line expanded

September 9, 2009

Metabo Corp. now offers its expanded Choice Cuts line of thin cutting wheels matched to specific applications.The expanded line features four wheel types with a wider selection of job-matched abrasive...

Continue Reading

Descaling tool suitable for heavy-duty applications

July 14, 2009

Dynabrade's air-powered Dynascaler is a descaling and surface preparation tool suitable for heavy-duty applications. The tool powers Roto Peen bonded flap assemblies for removing rust, oxide, scale,...

Continue Reading

Plasma cutting system processes all AISC structural shapes

June 9, 2009

Peddinghaus Corp. has introduced a new thermal processing technology called Ring of Fire. It has the capacity to process all AISC structural shapes, including beams, columns, angle iron, channel iron,...

Continue Reading

Compact angle grinder has 10,000 RPM no-load speed

November 11, 2008

Metabo Corp.'s compact W8-125, a 5-in. angle grinder, is suitable for finishing welded seams, rough grinding for weld preparation, and sanding and cutting applications. The grinder employs cooling...

Continue Reading

Welding end prep tool designed for high-temperature, -pressure applications

May 13, 2008

Esco Tool offers the MILLHOG® Dictator ID clamping welding end prep tool. It is designed for beveling pipes in which the weld is critical because of high temperatures and pressures.The tool is...

Continue Reading

Angle grinder can be used in many different positions

April 15, 2008

Metabo Corp. has introduced the W6-115, a 4-1/2-in. angle grinder.The 4.5-lb. grinder has a 2-3/16-in.-dia. grip and can be used in many different positions, the company reports. It has a 650-W, 6-amp...

Continue Reading