- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 316
- From The Fabricator
Fan circulates air more than 40 ft.
- May 14, 2015
- Shop Management
- Product Release
Milwaukee Tool has expanded its M18™ cordless system with the introduction of the Jobsite Fan. It circulates air more than 40 ft. and can operate for up to 17 hours on low with an XC5.0 battery pack. An AC adapter is included for extended runtime. The fan provides up to 284 CFM. It offers...
- From The Fabricator
3-D infrared scanner available as robotized system
- May 14, 2015
- Testing and Measuring
- Product Release
Aimess offers the 3-D infrared scanner R3Dscan as an automated system with direct connection to industrial robots. It can be integrated into production lines to inspect dimension, shape, and position of objects in manufacturing cycles. The system is designed to inspect objects with transparent,...
- From The Fabricator
Upcut saw’s worktable moves after cutting to prevent scratches
- May 14, 2015
- Sawing
- Product Release
Pat Mooney Saws offers the PMI455A upcut, automatic, high-production cutoff saw for cutting aluminum extrusions and other nonferrous metals. The 10-HP-motor saw features a worktable that moves 2 mm forward and backward after the cut is complete and the saw blade is retracting. This feature...
- From The Fabricator
Vacuum turns pipe into a conveyor
- May 13, 2015
- Shop Management
- Product Release
Exair’s new aluminum 3/8 NPT and 1/2 NPT Threaded Line Vac™ air-operated conveyors convert ordinary pipe into a conveying system for parts, scrap, and trim. Their small size makes them suitable for fitting in the cramped spaces and tight confines of many production lines. The unit is...
- From The Welder
Grinding wheel is 0.25 in. thick for additional life
- May 13, 2015
- Cutting and Weld Prep
- Product Release
Rex-Cut Abrasives has expanded its Sigma Green grinding wheel line to include Sigma Green Max, a 0.25-in.-thick version designed for added life. The wheel is produced from bonded resin with a combination of grains that enable it to grind extremely fast compared to other products without sacrificing...
- From The Fabricator
Dust collector offers ledgeless design for reduced dust buildup
- May 13, 2015
- Shop Management
- Product Release
The FORCE™ dust collector from Micro Air Clean Air Systems controls dust and fumes in a variety of plant applications. The exclusive Roto-Pulse® filter cleaning system increases filter life, according to the manufacturer. The true ledgeless design eliminates dust buildup inside the cabinet....
- From The Fabricator
Automatic plate-processing system punches, shears simultaneously
- May 13, 2015
- Punching and Other Holemaking
- Product Release
Trilogy Machinery Inc. has introduced the new Sunrise APS fully automatic plate-processing system. It can punch and shear simultaneously. The fully enclosed system is driven by a rack-and-pinion infeed that can handle up to 40-ft. lengths of material at speeds up to 40 FPM. Standard features...
- From The Fabricator
Aluminum full-grip jaws help minimize distortion for thin-walled parts
- May 12, 2015
- Machining
- Product Release
Dillon Mfg. offers aluminum full-grip jaws from 5 to 24 in. dia. for machining of thin-walled parts. These cast-aluminum (356-T6), wraparound top jaws can provide minimum jaw force and distribute the gripping pressure over more of the workpiece’s surface to help maintain accuracy. This type...
- From The Fabricator
Lift truck made for indoor and outdoor use
- May 12, 2015
- Shop Management
- Product Release
UniCarriers Americas Corp. offers the Platinum II Nomad® series lift truck, designed for use indoors and outdoors. Built on a compact frame, the truck rides on solid pneumatic tires, which allow it to be used outside on paved surfaces. Models are available in 3,000-, 3,500-, and 5,000-lb....
- From The Fabricator
Rebuilding services offered for workholding magnetic chucks
- May 12, 2015
- Shop Management
- Product Release
Walker Magnetics offers rebuilding and repair services for its workholding magnetic chucks. The firm recently received a 36- by 48-in. chuck for repair after 77 years in use. The company still had the drawings associated with its build in 1938 and was able to use the drawings to rebuild the...
- From The Fabricator
Green laser-line scanner performs on highly reflective materials
- May 12, 2015
- Testing and Measuring
- Product Release
ScanR is the sixth generation of CMM laser scanners from Perceptron for scanning highly reflective and carbon-fiber parts. This green laser-line metrology scanner has wide coverage of color spectrum and reflectivity, improved material coverage, a thin laser line with high signal-to-noise ratio...
- From The Fabricator
Sintering furnace belt pretreated for longer life
- May 12, 2015
- Shop Management
- Product Release
Cambridge Engineered Solutions has introduced Knuckleback™ Platinum, a new woven T314 stainless steel conveyor belt used in the final sintering stage in powdered metal production lines that produce parts for automobiles and home appliances. A pre-oxidation process provides surface protection to...
- From The Fabricator
Quoting tool added to CAD/CAM nesting software
- May 12, 2015
- Manufacturing Software
- Product Release
Hypertherm has introduced Version 11.1 of its ProNest® 2015 CAD/CAM software. A quoting tool has been added that can calculate per-part and total costs for any job. This tool is suitable for job shops, metal service centers, and other fabricators who need to quote work to external customers. In...
- From The Fabricator
Reciprocating surface grinder available
- May 8, 2015
- Finishing
- Product Release
Knuth Machine Tools USA has introduced the HFS-B VC series reciprocating surface grinder. It comes with a programmable Siemens PLC, magnetic clamping plate, and coolant and exhaust system with complete particle filtration. Table size is 10 by 20 in. to 16 by 31 in., and the grinding wheel size...
- From The Fabricator
Cooling vests maintain 58 degrees F for four hours
- May 8, 2015
- Safety
- Product Release
Ergodyne has added three new cooling vests to its Chill-Its® phase change series. They offer a honeycomb cooling pack design for flexibility and a short, wide design for improved mobility for wearers. The adjustable hook-and-loop closure on the shoulders and waist allows for a customizable fit....
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Capturing, recording equipment inspection data for FMEA
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Zekelman Industries to invest $120 million in Arkansas expansion
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1