Contributing Writer
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Drive fast, weld right
Motorsports fabricators use more than tools to build topnotch race cars
- By Stephanie Vaughan
- November 7, 2006
- Article
- Arc Welding
"Drive fast, turn left" may be a popular motto among race car drivers, but motorsports fabricators have their own: "Drive fast, weld right."
A successful racing team is the sum of its parts, from the fabricators to the painters to the drivers. One of the most critical components is welding, which helps keep drivers safe and is key to building cars that outperform the competition.
Fabricating a race car takes a lot of tools: snips, grinders, pneumatic tools, deburring knives, adhesives, abrasives, fasteners, cutting tools, CNC equipment, lasers, drill bits, shears, saws, drills, nuts, bolts, and, of course, welding equipment.
All of them help define a race car's appearance.
"It's gotta be like you never really touched it. You don't want scratches or burrs," said Shane Love, lead welder and motor room fabricator for Joe Gibbs Racing, Huntersville, N.C. (see Figure 1).
An even more important role of the welds is to safeguard drivers, especially as they reach top speeds on the track.
"Someone can get killed if you don't have a proper weld," said Mickey Holmes, manager of motorsports marketing, The Lincoln Electric Co., Cleveland.
Welding: It's Everyone's Responsibility
Welded race car parts include the chassis, spoilers, seat brackets, and the rear end housings connected to the upper and lower control arms.
Because so much welding is necessary, often everyone in a racing fabrication shop has to be able to weld.
"The bodies are all steel and have to be all tack-welded together," said Jon Moore, fabricator/welder for Roush Racing's Busch Series shop in Mooresville, N.C. (see Figure 2). "At some point everyone has to do some kind of welding, whether they tack in place or get it all welded together."
But before striking an arc, motorsports fabricators also must know metallurgy. In NASCAR®, for example, although car bodies, inner crush panels, and the chassis are steel, more and more exotic metals are being used as well. This creates more challenges for welders.
"There are different rules that apply to each type of material," Holmes said. "You have to keep the welders updated on the latest technology with the latest materials that are coming in."
Love added that it's important for welders to know their material and make sure they have the right equipment to work on it. This includes knowing not only what the material is, but also how it's made, if it's been heat-treated, what kinds of stresses will be on the part, and what filler material should be used (see "The fast and the filler metal").
"It used to be you put this race car on the track and go racing, and now you have to think about engineering," said Love, whose expertise is in specialty materials. "You're using different materials and different processes to make it hold up."
GMAW or GTAW?
While many fabricators and engineers have their preferences, gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) are the two primary welding processes used in motorsports fabrication. In years past roll cages were welded using shielded metal arc welding (SMAW).
Like most racing fabrication shops, Roush uses both processes, but Moore said he favors GTAW because of its cleanness and precision.
Holmes said that GTAW has its benefits for motorsports fabrication.
"With TIG you get better control over your quality and less heat distortion," he said, adding that he's seen GTAW use increase in NASCAR. "The heat-affected zone is a little bit smaller so your chances of cracking lessen. It takes a lot more time, but you get less distortion, so it will hold tolerances better and the quality is higher."
Despite motorsports fabricators' preferences, each process is suited for different parts of a race car.
"Typically, as far as NASCAR goes, they use MIG to hang the sheet metal on the bodies. In the NHRA [National Hot Rod Association] and IRL [Indy Racing League], the majority is TIG-welded, [and] the chassis and everything in IRL is TIG-welded," Holmes said, adding that each racing league has its own fabrication rules.
John Patalak, special projects engineer for NASCAR, has found that both processes offer acceptable results. "We're getting similar results in testing between the two processes," he said.
Safety: A Priority for Drivers and Fabricators
While keeping drivers safe is paramount, so is the safety and health of workers fabricating and repairing race cars.
"It's huge," Love said of the safety aspect in the Joe Gibbs fabrication shop (see Figure 3). "We have systems from Lincoln Electric that have an automatic light on them and the arm comes down to the workpiece and pulls the smoke and fumes away from you. We also use the 3M helmet Speedglas system with an air blower."
In addition, fabricators at Joe Gibbs wear Carbonex™ clothing, a flame-retardant material that many drivers wear, to protect against heat and sparks.
Another aspect of safety—for drivers as well as welders—is the use of polyethylene foam, according to David Wirt, account executive for 3M's Automotive Aftermarket Division. Polyethylene foam can be used in various components of an automobile's interior.
To safeguard the driver, this foam absorbs impact. For the welder, it helps pinpoint gaps the welder missed, Wirt said.
The fast and the filler metal
One of the most important aspects of motorsports welding is choosing the right filler metal.
"If I'm doing a mild steel project, I [have to] know my temperatures and stress and fatigue and get as close a number as possible [with the filler metal]," said Shane Love, lead welder and motor room fabricator for Joe Gibbs Racing, Huntersville, N.C.
Love said that although the filler rod's tensile strength should match the base metal's tensile strength as closely as possible, other considerations also are necessary.
"Diameter is huge," Love said. "A lot of times when you're TIG welding, you're welding a thick material. If you use a thick filler metal, it doesn't flow very well, so you have to use a smaller diameter and do a multipass to make sure that your weld is convex."
Love also advises making sure that a welder can carry the weld puddle all the way around the part once welding begins.
As a rule of thumb, Love said that welding gaps between thick and thin metals requires filler metal. He also feels that filler metal is necessary when welding mild steel.
"Softer materials need filler metal," he said. "When you weld on a mild steel part that's gonna get hit, a heat pass will weaken that metal, so you add filler metal to make them bond better."
Learn about choosing filler metal for welding 4130 in motorsports applications at:
Welding Race Cars.
Resurrecting the Race Car
As most racing fans know, the need for welding doesn't end when a race car hits the track. Crashes require teams to dissect race cars to figure out which parts have been affected and which ones have remained intact.
When a car comes back after a crash, it goes through a standard repair sequence.
According to Love, first the car is stripped down to the chassis and the body. Next the damaged body parts are removed. Then the car is bolted to the chassis plate. If, once it's bolted down, the car is in the same position it was in before leaving the fabrication shop, the car's structure is OK. If it isn't, broken or moved parts must be cut off. Then the rest of the work begins.
"When everything's in position, you start putting the pieces of the puzzle back together," Love said.
Although they're not common, on-site repairs at races can be challenging, Holmes said. Much of this is because the top fabricators in race shops who build the cars don't always travel with the teams.
Holmes said, however, that he's seeing more teams learn about welding and bring welders with them who are comfortable making repairs. Generally, he said teams travel with some equipment; for example, an inverter GTAW machine because it's lightweight and often lets fabricators do more than a standard machine allows.
No matter where the repair is made, how the welds hold up is particularly important, according to Don Fair, components leader for Chip Ganassi Racing, Concord, N.C.
"Everyone wants to know which parts failed and which held up. They all have ownership to their work," Fair said of the team's fabricators. "We use all the information we can to better ourselves each time. When parts of a wreck come back to our shop, we're all there to sort it out."
What's driving the future of motorsports fabrication?
A new generation of welders, an evolving toolbox of equipment, and engineering modifications are just some instruments of change in motorsports fabrication.
Newer and younger welders are trickling into many racing fabrication shops, according to Jon Moore, fabricator and welder for Roush Racing.
"I'm seeing more people that are able to do it," Moore said. "There's a whole other generation coming in."
In addition, Mickey Holmes, Lincoln Electric's manager of motorsports marketing, predicts that welding codes—which already guide bridge-building and construction welding, for example—will be written for motorsports in the future.
"There has been a trend toward certification within the industry. A lot of teams have been proactive in getting their welders certified," said Holmes.
As for technology, Shane Love, lead welder and motor room fabricator for Joe Gibbs Racing, hopes to see more automation.
"I can control my process and make each part the same [with a robot]," Love said. Another way to get consistency is to engineer certain race car parts especially for uniformity. That's what the Car of Tomorrow is all about in NASCAR.
Primary considerations for this set of design templates were safety innovations, performance and competition, and cost efficiency for teams. According to John Patalak, special projects engineer for NASCAR, Concord, N.C., the template called for a center section that's CNC-bent with tubing that's laser-cut for notches and fit-up.
"As far as welding goes, because the center section is CNC-bent and laser-cut, tolerances can be held a lot tighter," Patalak said. He said that although robotic welding wasn't pursued for the Car of Tomorrow, it's still a possibility for the future.
While large racing teams will be fabricating these chassis to specification in-house, other teams will buy kits for premade chassis or chassis parts ready to be assembled.
"[Race car fabricators] have been cutting to length with a band saw, using tube benders, making bends, putting it in a jig, using a manual notcher—all manual," said Greg Fornelli, whose company, Stock Car Steel, Mooresville, N.C., supplies tubing for almost every race car in NASCAR. "[Today] it's really going CNC. Technology is really catching up."
Joining technologies used in race car fabrication also are evolving, according to Jim Goff, operations manager for SRI, Mooresville, N.C., which Fornelli also owns.
"The use of two-part epoxy is increasing; it's being used in place of fasteners and welding in noncritical applications," Goff said, adding that this evolution is due largely to the need for more efficiency.
Cutting tools also are aiding productivity in race fabrication, according to Dale Newcomb, fabrication shop supervisor for Bobby Hamilton Racing, Mount Juliet, Tenn.
"Time is always a big deal, and unishears save time," Newcomb said. The shop also recently had a laser system installed for that aids in positioning car bodies accurately.
"Getting the laser is an advance," Newcomb said. "The faster you got guys hanging a body, the better you're going to be and the less your men have to work."
Bobby Hamilton Racing,www.bobbyhamiltonracing.com
Chip Ganassi Racing, www.chipganassiracing.com
Joe Gibbs Racing, www.joegibbsracing.com
About the Author
About the Publication
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI