Senior Editor
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
FAB 40: Data analytics meets high-volume contract fabrication at OMS
Contract fabricator steps up its use of data for optimal planning
- By Tim Heston
- June 12, 2014
- Article
- Shop Management
As a steel distributor, O’Neal has offered value-added fabrication capabilities for years, but in 2011 the organization formally launched Birmingham, Ala.-based O’Neal Manufacturing Services, offering full-service contract fabrication with a national reach.
OMS—No. 2 on this year’s FAB 40—is coming off of a soft 2013 due largely to economic conditions, especially during the last two quarters of the year, with drops in agricultural equipment, construction, and railcars. But at this writing, several sectors seem to be on the rebound, especially in the construction sector. Meanwhile, agricultural equipment, after a slight rebound after last year’s slump, may be dropping a bit later this year. “This year our [revenue] projection is for us to be about right where we were in 2012,” said Matt Miller, OMS’marketing coordinator.
In 2013 OMS opened its 11th plant, an Oklahoma facility that previously housed an operation for O’Neal’s steel distribution business, to meet local customer demand. “Regionally, if you look at a map [of all OMS plants], it was pretty bare in the Oklahoma region,” Miller said, “so we’ll be looking to build up our customer base.”
Being such a large and spread-out organization has its benefits, especially when it comes to meeting capacity demands. For some of its work the company takes a dual PPAP (production part approval process) approach—that is, two facilities are approved to run the product to mitigate risk. If for whatever reason one plant can’t meet the delivery date, another plant steps up to do the job.
But OMS still is a custom fabricator and so must deal with all the variability that come with that environment. Managers are hoping to better predict all those variables with data. OMS’s recent software upgrades may show that data analytics has caught up with the complex world of contract manufacturing.
For instance, OMS has implemented sales and operations planning, or S&OP. The concept—and OMS’s custom data analytics software that syncs information with the company’s enterprise resource planning (ERP) platform—in part entails a rolling forecast based on the latest data and order histories. The system projects capacity requirements over the next year, which planners can compare with operational capacity charts to ensure OMS will be able to meet the requirements.
“This initiative allows us to have visibility of capacity requirements, to uncover where we might have shortfalls on equipment, and ultimately to be able to plan better,” Miller said. “And it will allow us to spend our money better out into the future.”
No prediction in business, including sales forecasts, is always accurate, but the initiative at least has given managers more information to work with. Over time the system will track trends, comparing forecasts with actual sales.
“It gives us the visibility to ask the questions,” Miller said. “We’ve talked with one of our customers that implemented S&OP, and their latest forecast was actually 91 percent accurate, which is phenomenal.”
The company has also deployed monitoring systems throughout its plants. The platform uses software called ShopLogix, which allows managers to see shop floor efficiencies on a real-time dashboard. It also provides a standard schedule for preventive maintenance and records unexpected downtimes.
Miller added that software and the data it gathers has helped OMS streamline and coordinate on a national scale. Monitoring software in one plant may show an overall equipment effectiveness (OEE) percentage at a certain work center performing a certain job. Another OMS plant may run a similar job on similar equipment and have a much higher OEE. Why? The data helps managers ask the right questions, uncover inefficiencies, and spread best practices throughout the company. For a fabricator with 1,400 employees spread across much of the country, that’s no small feat.
About the Author
Tim Heston
2135 Point Blvd
Elgin, IL 60123
815-381-1314
Tim Heston, The Fabricator's senior editor, has covered the metal fabrication industry since 1998, starting his career at the American Welding Society's Welding Journal. Since then he has covered the full range of metal fabrication processes, from stamping, bending, and cutting to grinding and polishing. He joined The Fabricator's staff in October 2007.
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Capturing, recording equipment inspection data for FMEA
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI