- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Nucor Executive Vice President Joe Rutkowski to retire; Joe Stratman to assume additional responsibilities
- January 11, 2010
- News Release
- Metals/Materials
Nucor Corp. Executive Vice President of Business Development Joseph A. Rutkowski announced today his plans to retire at the end of February after 21 years of service with the company. Rutkowski began his career as Manager of Nucor Cold Finish, Norfolk, Nebraska, in 1989; served as Manager of Melting and Casting of Nucor Steel, Plymouth, Utah, from 1991 to 1992; General Manager of Nucor Steel, Darlington, South Carolina, from 1992 to 1998; and General Manager of Nucor Steel, Hertford County, North Carolina from August 1998 to November 1998. He was promoted to Vice President in 1993 and to Executive Vice President in 1998.
Effective March 1, 2010, R. Joseph Stratman will assume responsibility for business development activities while continuing his role as Executive Vice President of Beam and Plate Products. Stratman began his Nucor career in 1989 as Controller of Nucor Building Systems, Waterloo, Indiana. He then served as Controller of Nucor-Yamato Steel Company from 1991 to 1998; General Manager of Nucor Steel, Norfolk, Nebraska from 1998 to 1999; and General Manager of Nucor-Yamato Steel Company from 1999 to 2007. He was promoted to Vice President in 1999 and to Executive Vice President in 2007.
Dan DiMicco, Nucor's Chairman, CEO and President, commented: "Joe Rutkowski has made outstanding contributions throughout his 21-year career to Nucor's strong record of profitable growth. With his leadership of our business development activities this decade, the Nucor team has very successfully executed on our growth strategy. Joe has been an exceptional leader throughout his Nucor career. His advice, counsel and support have been key to the success of the entire Nucor team, of which he will forever be a member. Joe's retirement plans are consistent with another key strategic initiative in recent years to position our company for continued profitable growth - thoughtful and orderly succession planning. Joe Stratman is a proven Nucor leader who has strong experience both at operating divisions and at corporate. He is well-prepared to help our team build more platforms for profitable long-term growth."
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Capturing, recording equipment inspection data for FMEA
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI