- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Manufacturing technology consumption up 83.2 percent year-to-date
- December 13, 2010
- News Release
- Shop Management
October U.S. manufacturing technology consumption totaled $387.13 million, according to AMT - The Association For Manufacturing Technology and AMTDA, the American Machine Tool Distributors' Association. This total, as reported by companies participating in the USMTC program, was down 2.5 percent from September but up 154.9 percent when compared with the total of $151.86 million reported for October 2009. With a year-to-date total of $2,477.06 million, 2010 is up 83.2 percent compared with 2009.
These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTC program.
"Never in the history of the USMTC have we seen a post-IMTS October rival September so closely," noted Douglas K. Woods, President of AMT. "Increased Sec. 179 expensing and 50 percent bonus depreciation enacted in late September helped offset the declines we normally see after a show. Looking ahead, enactment of the pending tax package would give U.S. manufacturers a big boost heading into the New Year."
The United States Manufacturing Technology Consumption (USMTC) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. consumption data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology consumption provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.
U.S. manufacturing technology consumption also is reported on a regional basis for five geographic breakdowns of the United States.
Northeast Region — With a total of $97.59 million, October Northeast Region manufacturing technology consumption was up 51.0 percent when compared with September's $64.62 million and up 277.5 percent when compared with October a year ago. At $461.40 million, 2010 year-to-date was 75.9 percent higher than the comparable figure a year ago.
Southern Region — Manufacturing technology consumption in the Southern Region in October stood at $40.01 million, 40.2 percent less than September's $66.92 million but 84.3 percent more than the October 2009 total. The year-to-date total of $349.01 million was 86.3 percent above the comparable figure for 2009.
Midwest Region — October manufacturing technology consumption in the Midwest Region totaled $116.66 million, down 3.3 percent when compared with the $120.67 million total for September but up 147.5 percent when compared with October a year ago. The $746.43 million 2010 year-to-date total was 92.2 percent higher than the total for the same period last year.
Central Region — At $92.45 million, October manufacturing technology consumption in the Central Region was 18.7 percent less than September's $113.72 million but up 167.7 percent when compared with last October. The $651.50 million 2010 year-to-date total was 101.2 percent above the 2009 total at the same time.
Western Region — Manufacturing technology consumption in the Western Region in October stood at $40.41 million, 29.4 percent higher than the September total of $31.24 million and 78.6 percent higher than the total for October 2009. With a year-to-date total of $268.73 million, 2010 was up 40.9 percent when compared with 2009 at the same time.
Related Companies
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Capturing, recording equipment inspection data for FMEA
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI