Plasma Cutting Tech Cell

Welcome to the Plasma Cutting Tech Cell. Here you will find information on plasma cutting equipment, cutting gases, and cutting tips.

Heavy piercing with plasma

High-density plasma arc cutting can effectively cut thick plate. The most challenging aspect, in fact, is that initial pierce. To that end, a few basic strategies help overcome this challenge, allowing the plasma to pierce through inches of metal as effectively as possible.

Biselado con plasma: ¿qué pueden dar las máquinas de la actualidad?

Como puede decírselo cualquier fabricante de metal, un taller es tan eficiente como todos sus procesos en conjunto—no sólo uno.

Plasma beveling: What can today's machines deliver?

Plasma beveling technology has progressed in recent years to the point where the degree of taper has been reduced greatly and the ability to achieve predictable results, cut after cut, is possible. Having said that, a knowledgeable equipment operator can have a tremendous impact on optimizing the equipment's performance.

Plasma cutting to 'Galpinize'

Galpin Auto Sports pushes the envelope when it comes to car customization, and plasma cutting helps the company push the limits.

Done-in-one, cutting plate

Combination machines have brought the done-in-one concept to the heavy plate fabricator's shop floor.

Featured Articles: 1 2 3 4 5 More Articles

Latest Plasma Cutting News
More Plasma Cutting News

Pipe cutting attachment for plasma system offered

PlasmaCAM Inc. has introduced a new pipe cutting attachment for its CNC plasma cutting system and software. The machine can cut sheet metals from 30 ga. to 1 in. thick, as well as round pipe and tubing. The attachment can perform cuts from simple saddles to four-way header collectors on...

Pipe cutting attachment for plasma system offered

PlasmaCAM Inc. has introduced a new pipe cutting attachment for its CNC plasma cutting system and software. The machine can cut sheet metals from 30 ga. to 1 in. thick, as well as round pipe and tubing. The attachment can perform cuts from simple saddles to four-way header collectors on...

Plasma cutting system consumables designed for extended life

Hypertherm now offers Centricut consumables for Kaliburn Spirit and ProLine plasma cutting systems. According to the manufacturer, laboratory testing shows the life expectancy of the consumables is two to three times longer than that of OEM consumables when cutting at 275 amps and below, and...

Plasma system processes both plates and tubes

AKS Cutting Systems has introduced a system for plasma processing of both plates and tubes. Available on its accu-kut heavy-duty, unitized precision plasma plate cutting system, the tube processing center can perform plasma processing of tube and pipe. Used in conjunction with the robo-kut...

Metal cutting controller has expanded functionality

Hypertherm has announced plans to produce the new MicroEDGE Pro CNC with the latest Phoenix® version 9 software. The CNC delivers customizable control for a variety of cutting applications. The software expands the control's functionality for multiple plasma bevel designs, waterjet, and...

Plasma cutter with drilling spindle designed for heavy plate

MultiCam® Inc. offers the heavy-duty 6000 series CNC bridge and rail plasma with drilling spindle. The system is designed for manufacturers cutting heavy plate or needing a large processing area while maintaining accuracy and cut quality. The motion platform is independent from the cutting...