- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
The Fabricator December 2002
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
Waste not, want not
- By Dave Petrack
- Jun 12, 2003
- Tube and Pipe Fabrication
- Article
Any manufacturing process that goes awry can result in waste in many forms, both obvious and hidden. A simple project in which tube is cut, bent, formed, and welded can result in large amounts of wasted money and time if one of the processes goes wrong.
How to select the right IRONWORKER for your application
- By Jim Hoag
- Jan 16, 2003
- Punching and Other Holemaking
- Article
An ironworker can be an important and versatile machine in a metal fabricating shop. Quite often ironworking is the first step in the manufacturing process, and one ironworker typically can provide enough fabricated material to keep up to seven welders or assemblers busy.
Five ways to add punch to productivity
- By Jeff McQuarris
- Jan 16, 2003
- Punching and Other Holemaking
- Article
It is no surprise that fabricators are always looking for ways to increase productivity; however, many don't realize that a simple solution sometimes can be found right in front of them.
Everything you need to know about flatteners and levelers for coil processing—Part 3
- By Eric Theis
- Jan 16, 2003
- Bending and Forming
- Article
Editor's Note: This article is Part III of a four-part series covering flatness and stability in cut-to-length, slitting, and tension leveling operations. This article discusses how coil processors can make metal flat so it stays that way. Part I, which appeared in the October issue of The FABRICATOR®, discussed how flat-rolled metal gets unflat; Part II in the November issue covered flattening solutions and the anatomy of a bend; and Part IV in the January 2003 issue will discuss new applications and options in leveling equipment.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1