- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
The Fabricator October 2003
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
New PC-based controls open path to better press brake utilization
- By Todd A. Kirchoff
- Nov 6, 2003
- Bending and Forming
- Article
Press brake forming always has been a labor-intensive process. Shrinking lead-times and smaller lot sizes demand more frequent setups, which cut into productive output hours and put more pressure on manufacturing efficiencies. Fabricators need to find ways to reduce machine downtime for setup and operator adjustments.
Pinpointing future laser welding markets
- By Lincoln Brunner
- Oct 23, 2003
- Shop Management
- Article
Aficionados of laser welding technology at times must feel a little like telephone vendors beamed back to 1603. They know almost everyone is going to use them in the future, but getting buy-in today can be like hawking loans at 25 percent-lots of interest and few takers.
The importance of storage planning
- By Joe Harnest
- Oct 23, 2003
- Materials Handling
- Article
Material and equipment storage can be a major concern for fabricators. Therefore, it is important to establish the purpose of a storage system and understand clearly what it needs to accomplish.
Programming multiple robots
- By Mary Kay Morel
- Oct 23, 2003
- Automation and Robotics
- Article
In many applications—such as large-component welding, press-tending lines, and multiprocess cells—running multiple robots from a single point of control assists in preventing collisions, simplifying the programming structure, and reducing integration cost. This approach also meets the American National Standards Institute/Robotic Institute of America (ANSI/RIA) R15.06-1999 safety standard.
March for manufacturing
- By Scot Stevens
- Oct 23, 2003
- Shop Management
- Article
As the "jobless" recovery continues, the job cleansing of the U.S. manufacturing base tops 2.7 million. These millions now without jobs remain faceless, statistical footnotes to mainstream media reports about how the recession ended in 2001, production is on the rise, and how job losses are singularly attributable to productivity gains. The outsourcing of the American dream for small manufacturers proceeds unabated.
Camp Manufacturing
- By Stephanie Vaughan
- Oct 1, 2003
- Shop Management
- Article
Ah, the memories of summer camp. Swimming, sunscreen, hiking, bug spray, camping, arts and crafts. And the promise of an exciting experience with friends. Like youths all over the U.S., 10 students from the Rockford, Ill., region have their own summer camp recollections. Theirs are from a one-week experience the last week of July, but it wasn't necessarily like the camp you may remember.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1