- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
OSHA proposal would lower beryllium levels, increase workplace protections
- August 6, 2015
- News Release
- Safety
The federal government is proposing a new standard that would dramatically lower workplace exposure to beryllium, a widely used material that can cause lung diseases. The proposal would apply to an estimated 35,000 workers covered by OSHA.
Currently OSHA’s eight-hour permissible exposure limit (PEL) for beryllium is 2.0 micrograms per cubic meter of air. Above that level, employers must take steps to reduce the airborne concentration of beryllium. That standard was originally established in 1948 by the Atomic Energy Commission and adopted by OSHA in 1971. OSHA’s proposed standard would reduce the eight-hour PEL to 0.2 microgram per cubic meter. The proposed rule also would require additional protections, including PPE, medical exams and other medical surveillance, and training.
The 1971 limit significantly reduced fatalities due to acute beryllium disease but, over time, it became clear that exposure below that limit also had damaging long-term health effects. OSHA initially proposed to lower the PEL for beryllium in 1975.
The need for a new standard was recognized by the nation’s primary beryllium product manufacturer, Materion, and the United Steelworkers, the union representing many of those who work with beryllium. Together, they approached OSHA in 2012 to suggest a stronger standard.
OSHA estimates that the rule could prevent almost 100 deaths and 50 serious illnesses each year. Workers who inhale beryllium particles can develop a debilitating, incurable illness known as chronic beryllium disease and are also at increased risk of lung cancer. Dangers arise when beryllium-containing materials are processed in a way that releases airborne beryllium dust, fume, mist, or other forms.
The majority of current worker exposures to beryllium occur in operations such as foundry and smelting operations, machining, beryllium oxide ceramics and composites manufacturing, and dental lab work.
Members of the public may read the proposal and submit written comments at www.federalregister.gov/articles/2015/08/07/2015-17596/occupational-exposure-to-beryllium-and-beryllium-compounds. Comments must be submitted by Nov. 9, 2015.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI