Industrial Systems and Manufacturing Instructor
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Aluminum Etc.: How to seal aluminum joint welds
Reduce the chance of developing expanded gas inside a weldment
- By Gina Cutts
- June 2, 2022
- Article
- Aluminum Welding
“Is it always necessary to drill a hole for gas expansion when sealing or capping an aluminum weld like we do when welding steel?”
The short answer is no. But, and there is always a but, knowing what is happening with your weld will help you to make good decisions about your project.
It’s important to remember that cosmetic aluminum welds need to be visually appealing and have structural integrity but are not coded as structural or high-pressure vessels. Structural, high-pressure, and nuclear welds follow a strict weld procedure specification; you must be qualified on those welds by a CWI; and the welds will need to undergo nondestructive testing to ensure they are sound.
When sealing your aluminum weld, be sure to avoid the following:
- Defective or incomplete welds. Either of these could allow a liquid to enter into your weldment or allow a gas to escape.
- Contamination. The presence of contamination weakens the fusion zone and decreases corrosion resistance while also altering mechanical properties.
- Trapped gas. This can cause you to encounter a gummy part of the weld that is hard or impossible to close.
The gummy weld at the end of a bead is caused by gas expansion while it is still inside your weldment. If you are in a hurry, drill a small hole into the weldment to allow for the gas to escape. You can come back and seal it up once everything has cooled down and the gas has dissipated. You should be able to seal without a problem, as long as doing so doesn’t raise the temperature of your weld significantly.
Another way to prevent gas expansion is to deliberately stop your weld short by ½ in. on the closing weld. Next, give the weldment a chance to cool down and the gas to escape. Walk away and start your next project, or maybe have lunch. Once everything has cooled down, clean the area to be welded to reduce or eliminate the oxide layer that most likely has formed during the cooling process. Finally, complete your weld bead.
About the Author
About the Publication
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Sheffield Forgemasters makes global leap in welding technology
ESAB unveils Texas facility renovation
Engine-driven welding machines include integrated air compressors
How welders can stay safe during grinding
The impact of sine and square waves in aluminum AC welding, Part I
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI