Senior Editor
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Is an expansion on the horizon?
- By Tim Heston
- September 10, 2009
U.S. economic output, when prices are adjusted for inflation, fell for four quarters in a row from 2008Q3 until 2009Q2. Data provided by the Bureau of Economic Analysis shows that the drop was biggest in 2009Q1, when it fell more than 6 percent from the previous period; it was smallest in 2009Q2, when it fell just 1 percent. Next quarter, who knows? I am betting on a bit of growth. The PMI, compiled from opinions of purchasing managers, climbed from a recent low of 32.9 in December of last year to 52.9 in August. The PMI has a couple of forward-looking components (new orders and order backlog), so it doesn't merely tell us where we are; it hints at where we are headed. The National Association of Credit Management's combined index, which also has a predictive element, hit bottom at 39.7 in December 2008; it climbed to 48.0 in July. Other signs are pointing in the right direction. According to Steel Market Intelligence©,steel prices outside China are on the rise. Data from the Energy Information Administration shows that the spot price for crude oil was less than $40 per barrel earlier this year, and these days it is hovering around $70. Prices follow demand—well, to some extent, anyway—and rising prices for industrial commodities reflect rising industrial activity. Has the tide turned regarding consumer behavior? Not yet. The most recent "Beige Book" came out yesterday, and it reported that consumer activity remained flat throughout much of the U.S. Flat? Well, I hope so. Just to put this into perspective, a year-to-year comparison reveals that consumer spending overall fell 1.8 percent from 2008Q2 to 2009Q2. That doesn't sound that bad, but consumer spending on motor vehicles and parts fell 15.3 percent during the same period. Nothing flat about that. Manufacturers of furnishings and durable household goods also were hurting; consumer expenditures in these categories fell slightly more than 10 percent. Consumer activity is a reflection of consumer confidence, and that confidence is tied closely to the unemployment rate. As measured by the Bureau of Labor Statistics, the unemployment rate has grown by 2.5 percentage points since December. A weekly measure, the number of new claims for unemployment insurance , tracked by the Dept. of Labor, peaked at 674,000 in late March. Last week 570,000 new claims were filed, which is an improvement, but it's far higher than the average number of weekly claims (356,000 since 2004). Until the unemployment rate heads south, we can expect lethargic consumer spending patterns and a wait-and-see attitude from most businesses.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Tim Heston
2135 Point Blvd
Elgin, IL 60123
815-381-1314
Tim Heston, The Fabricator's senior editor, has covered the metal fabrication industry since 1998, starting his career at the American Welding Society's Welding Journal. Since then he has covered the full range of metal fabrication processes, from stamping, bending, and cutting to grinding and polishing. He joined The Fabricator's staff in October 2007.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI