- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Safety and health bulletin focuses on pipeline safety
- August 10, 2004
- News Release
- Safety
Preventing fatal accidents or injuries for workers involved in dewatering pipelines is the subject of a new Safety and Health Information Bulletin issued by the Occupational Safety and Health Administration (OSHA). The bulletin was developed in association with the Research and Special Programs Administration's (RSPA) Office of Pipeline Safety (OPS), an agency within the U.S. Department of Transportation (DOT).
Pipeline dewatering is a process conducted following pipeline construction. The bulletin was designed to highlight potential hazards associated with the operations and to focus on work practices that will reduce the potential for unexpected separation of temporary dewatering pipes.
OSHA's area offices in Allentown and Wilkes-Barre, Pa., recently investigated two fatalities that occurred when the workers were struck by temporary dewatering piping that was not properly anchored and, due to excessive air pressure, eventually broke loose from its coupling.
The bulletin provides detailed background information on the procedures involved in ensuring the integrity of installed pipelines and reemphasizes OPS regulations on pipeline safety. A section of the bulletin describes hazards focusing on insufficient anchoring, worn couplings, excessive air pressure, and lack or training.
OSHA and OPS developed the bulletin to increase awareness of the hazards involved in pipeline dewatering and to encourage employers and workers to refocus their energies on ensuring proper procedures are followed during the process.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI