President
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Aluminum Workshop: Taming 6061-T anodized tubing
- By Frank Armao
- November 14, 2014
- Article
- Aluminum Welding
Q: I’m having a very difficult time welding 6061-T aluminum tubing that has been anodized. The weld won’t flow out correctly, I can see a lot of porosity, and the weld has a black color to it. What can I do to make the weld better?
A: The problem you are describing is a common one. Let’s take a moment to see what anodizing actually is so we can understand the problem better.
Anodizing, a relatively thick coating of aluminum oxide, is performed by making the part the anode in an electrochemical cell. It’s a bit like plating, but in reverse. Instead of depositing a metallic plating on the part, you deposit an aluminum-oxide coating. The result is a relatively clear coating of aluminum oxide.
The coating’s thickness varies depending on the anodizing solution and the parameters you use, but it is much thicker than coating that occurs naturally, and it is relatively porous. A brightly colored anodized coating usually means the color was added after anodizing by immersing the part in an organic dye. The anodizing is porous enough so that the dye penetrates it and remains.
When you try to weld over the anodizing, you will typically experience two problems. First, the anodizing is an electrical insulator that makes arc-starting difficult. It also acts as a barrier to the flow of the molten weld—remember that aluminum oxide melts around 3,700 degrees F, while the aluminum melts around 1,200 degrees F—so the weld pool will look gummy and uneven. Second, the anodizing is porous and absorbs water vapor from the air so when you weld over it, you will get a considerable amount of porosity.
So what should you do? Well, the easiest thing is to remove the anodizing in the area that you’re welding using a sanding disc or grinding wheel. If you can’t do that on the basis of weld appearance, there is a technique used by a small number of fabricators specifically for welding over anodizing. First, set your AC GTAW power supply up near its maximum current capacity—let’s say 300 amps. Now use a foot pedal to turn the arc on at 300 amps. As soon as the weld forms, add a drop of filler metal. After a second or so, turn the arc off. Move the torch ahead a bit and continue to repeat this process. In reality, you are making a line of overlapping spot welds.
This procedure can make a beautiful weld on anodized material, but it takes a while to learn and master the technique. You might want to start practicing now.
About the Author
Frank Armao
Aluminum Consulting Inc.
440-479-0239
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Sheffield Forgemasters makes global leap in welding technology
ESAB unveils Texas facility renovation
Engine-driven welding machines include integrated air compressors
How welders can stay safe during grinding
The impact of sine and square waves in aluminum AC welding, Part I
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI