President
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Choosing the right tungsten for aluminum TIG welding
- By Frank Armao
- Updated May 18, 2023
- November 5, 2014
- Article
- Aluminum Welding
Q: I am just getting into aluminum GTAW and I have heard many recommendations about which tungsten electrode I should use. Can you tell me how to make the right choice?
A: I will certainly try. First, let’s look at the commonly available tungsten electrodes (see Figure 1). Each type is given an AWS classification and includes a painted stripe around one end so you can easily identify the type.
The various additions to the tungsten electrode serve two purposes. First, it makes the tungsten less likely to sag or droop at high temperatures. Second, it makes it easier for the tungsten to emit electrons, which gives it a higher current-carrying capacity compared to pure tungsten.
Almost all direct current electrode negative (DCEN) welding that has been done in the past was with 2 percent thoriated electrodes, although more recently lanthanated and ceriated electrodes have become more popular for this type of welding.
However, when people started to aluminum GTAW using alternating current (AC), they found out thoriated electrodes really weren’t well-suited for that type of welding. In AC GTAW, much more energy is taken up by the tungsten than is taken up in DCEN welding. In the past the electrode choices were limited to pure tungsten or zirconiated tungsten, which could carry more current than a pure tungsten electrode of the same size. Neither of these electrodes was used with a sharpened tip. Instead, they were allowed to form a round ball on the end.
Thoriated tungsten did not form a nice round ball, but became very irregular in geometry, which produced a fluttery, irregular arc. So pure and zirconiated electrodes were preferred, and still are if your GTAW machine is an SCR/transformer type, especially an older model.
Inverter Machines and Tungsten TIG Welding
When inverter GTAW machines came on the scene, they changed everything. The balance control can be set much further toward electrode negative (EN) while still getting good arc cleaning action. Since only a little electrode positive (EP) is used, the tungsten electrode stays much cooler. In fact, the best electrodes for AC inverter GTAW machines are generally ceriated, lanthanated, and rare-earth electrodes, which are all sharpened to a point and can retain the point very well during use. Thoriated, zirconiated, and pure tungsten electrodes are not often used with AC inverter machines.
About the Author
Frank Armao
Aluminum Consulting Inc.
440-479-0239
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Sheffield Forgemasters makes global leap in welding technology
ESAB unveils Texas facility renovation
Engine-driven welding machines include integrated air compressors
How welders can stay safe during grinding
The impact of sine and square waves in aluminum AC welding, Part I
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI