- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
More from The Fabricator
- From The Fabricator
Schuler installs forging lines at Mongolia plant
- Jul 26, 2017
- Bending and Forming
- News Release
The Darkhan Metallurgical Plant (DMP), established in 1990 and located around 200 kilometers North of Ulaanbaatar, Mongolia, has installed two automated Schuler forging lines featuring short-stroke die forging hammers KGH 5.0B for the manufacture of steel balls with diameters of 100 to 140 mm. As a...
- From The Fabricator
Friction cups offer improved level compensation performance
- Jul 26, 2017
- Materials Handling
- Product Release
Piab has introduced the BXF family of 36 friction cups, available in four sizes and featuring additional bellows. According to the company, the cups offer improved level compensation performance, making them easy to program for destacking applications in which rack positions of sheets or other...
- From The Fabricator
MLFI-25 index up 5 percent, YTD
- Jul 26, 2017
- Shop Management
- News Release
The Equipment Leasing and Finance Association’s Monthly Leasing and Finance Index (MLFI-25) for June shows that new business volume was down 2 percent year-over-year, up 27 percent month-to-month, and up 5 percent year-to-date. Receivables over 30 days were 1.30 percent, down from 1.40 percent...
- From The Fabricator
W.W. Grainger names Coca-Cola executive to its board of directors
- Jul 26, 2017
- Shearing
- News Release
Chicago-based W.W. Grainger Inc., a supplier of maintenance, repair, and operating (MRO) products serving businesses and institutions, has appointed Beatriz “Bea” R. Perez, senior vice president and chief public affairs, communications, and sustainability office of the Coca-Cola Co., to its...
- From The Fabricator
NASA selects COSM for key design responsibilities
- Jul 26, 2017
- Shop Management
- News Release
COSM Advanced Mfg. Systems LLC, Ipswich, Mass., has been selected by NASA to design an electron beam system for an in-space autonomous assembly program. The work will be funded by a contract from NASA's Langley Research Center in partnership with Orbital ATK, NASA's Glenn Research Center, and the...
- From The Fabricator
Meritor earns quality, delivery awards
- Jul 26, 2017
- Shop Management
- News Release
Automotive supplier Meritor Inc., Troy, Mich., recently received multiple awards for quality and delivery. PACCAR, which manufactures DAF, Kenworth, and Peterbilt trucks, awarded the company’s Escobedo, Mexico, plant a 2016 10 PPM Quality Award for its excellence in meeting or exceeding the...
- From The Fabricator
IMCO Software CEO to present FABTECH workshop
- Jul 26, 2017
- Shop Management
- News Release
Ruben Mirensky, CEO of Chicago-based IMCO Software, is presenting the workshop “Using Industry 4.0 Technology for Scheduling, Traceability, and Inventory Management” Monday, Nov. 6, 2:45 to 3:30 p.m. at FABTECH® 2017. The workshop will focus on how to increase profits and productivity in...
- From The Fabricator
Integrated system helps simplify plasma beveling
- Jul 26, 2017
- Plasma Cutting
- Product Release
ESAB Welding & Cutting has released SmartBevel™ Technology for accurate bevel cutting with minimal operator intervention. It includes beveling data and geometric compensations necessary to cut V, X, Y, and K bevels on mild steel from about ¼ to 2 in. thick. The system integrates all bevel...
- From The Fabricator
Anxiety grips the U.S. steel markets
- By John Packard
- Jul 26, 2017
- Shop Management
- Blog Post
As of mid-July, uncertainty around the Section 232 recommendation and announcements by the Commerce Department and President Trump has caused steel markets to pause. Steel prices have been mixed.
- From The Fabricator
Plasma beveling system uses direct-drive technology
- Jul 26, 2017
- Plasma Cutting
- Product Release
ESAB Welding & Cutting Products has introduced the DMX automated plasma beveler, a compact system that cuts a full range of weld preparations, including V, Y, X, and K bevels, with cut angles up to 45 degrees on materials nearly 2 in. thick. The system is complemented by the release of the...
- From The Fabricator
Die Science: The science
- By Art Hedrick
- Jul 26, 2017
- Bending and Forming
- Article
I am not going to sugar-coat this article. Some of you may disagree with its content and find that very little of what I am about to share is true in your community. If so, my response to you is a sincere congratulations! I hope your community is the catalyst for change. I am on your side, and you...
- From The Fabricator
Hexagon engineer recognized in magazine’s "30 under 30" issue
- Jul 25, 2017
- Shop Management
- News Release
Hexagon Mfg. Intelligence, North Kingstown, R.I., has announced that Tim Pheland, a manufacturing engineer at the company, has earned recognition in the fifth annual “30 under 30” issue of Manufacturing Engineering, a publication of SME and Advanced Manufacturing Media. Pheland received his...
- From The Fabricator
Edge protection profiles protect sheet surfaces
- Jul 25, 2017
- Shop Management
- Product Release
J.W. Winco Inc. offers GN 2184 edge protection profiles. The RoHS-compliant profiles are installed on the front edge of metal sheets and plates, protecting the surfaces from damage by sharp edges. The edge finish additionally achieves an optical decorative effect while minimizing the need for...
- From The Fabricator
New Jersey aluminum manufacturing company facing $1.9 million in OSHA penalties
- Jul 25, 2017
- Safety
- News Release
Delair, N.J.-based Aluminum Services LLC is facing $1.9 million in fines after OSHA inspectors discovered 51 safety and health violations. OSHA inspected the company’s facilities in January and cited the company after finding that two employees were hospitalized following two separate incidents....
- From The Fabricator
Thyssenkrupp develops proprietary platform to connect machinery
- Jul 25, 2017
- Metals/Materials
- News Release
Thyssenkrupp has announced that it has developed toii, a digital platform that connects the machinery in its materials division. The platform enables all machines to communicate with each other and to forecast necessary maintenance. The name chosen by the business area is a double play on words. It...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Are two heads better than one in fiber laser cutting?
Supporting the metal fabricating industry through FMA
Zekelman Industries to invest $120 million in Arkansas expansion
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1