Plasma Cutting

Alone or assisted with water, plasma has proven itself to be one of the most efficient cutting processes for sheet, plate, tube, pipe, and profiles. Search this technology area for information on equipment, cutting tips, and gases.

Filter Content
MultiCam Inc. names Florida Technology Center sales manager - TheFabricator.com

MultiCam Inc. names Florida Technology Center sales manager

August 1, 2011

MultiCam® Inc., Dallas, has appointed James Anderson to sales manager of its Technology Center in Orlando, Fla. He was the technical support supervisor in that location for the past nine years. A former small-business owner in the metal fabrication industry, Anderson has experience in...

Continue Reading

Marking machine produces all layout on structural steel section in single pass

July 11, 2011

Peddinghaus Corp. has released the PeddiWriter automatic layout marking machine. The stand-alone machine produces all layout on a structural steel section in a single pass. Incorporating two independent Hypertherm ArcWriting torches within a four-axis layout marking system, the machine allows...

Continue Reading

Hypertherm named "Business of the Year" by Business NH Magazine

June 28, 2011

Hypertherm, a U.S.-based manufacturer of metal cutting products, has announced its selection as a 2011 Business of the Year by Business New Hampshire Magazine. The award recognizes businesses for outstanding business and civic contributions. One of nine New Hampshire businesses honored,...

Continue Reading

Stainless steel water coolers provide long-term cooling in GTAW, GMAW, and plasma cutting applications - TheFabricator.com

Stainless steel water coolers provide long-term cooling in GTAW, GMAW, and plasma cutting applications

June 27, 2011

Weldcraft offers six models of stainless steel water coolers, designed to provide consistent, long-term cooling in GTAW, GMAW, and plasma cutting applications. Each of the water coolers is available in 115- and 230-V models and operates on single-phase power. The 2500SS and 2502SS water coolers...

Continue Reading

Retrofit torch, consumable line expanded - TheFabricator.com

Retrofit torch, consumable line expanded

June 20, 2011

Hypertherm has expanded its line of Duramax™ retrofit torches and consumables. The torches now are approved for use on the company's Powermax1650®, and a new straight torch joins the previously released 75-degree hand torch and convertible machine torch. The straight torch, designed...

Continue Reading

Thermadyne announces consolidation of New Hampshire manufacturing operations

June 15, 2011

Thermadyne Holdings Corp. has announced that it is relocating the manufacturing operations of Thermal Dynamics, its wholly, owned subsidiary and manufacturer of plasma cutting and welding equipment located in West Lebanon, New Hampshire, to its other North American facilities. Engineering,...

Continue Reading

Thermadyne appoints senior product line manager - TheFabricator.com

Thermadyne appoints senior product line manager

June 3, 2011

Paul Eckhoff has joined Thermadyne®, St. Louis, a global manufacturer and marketer of metal cutting and welding products, as a senior product line manager for manual plasma cutting products. In this position, he plans and implements strategies to help the company compete globally and achieve...

Continue Reading

Plasma beveling

Plasma beveling: What can today's machines deliver?

June 2, 2011

By:

Plasma beveling technology has progressed in recent years to the point where the degree of taper has been reduced greatly and the ability to achieve predictable results, cut after cut, is possible. Having said that, a knowledgeable equipment operator can have a tremendous impact on optimizing the equipment's performance.

Continue Reading

Plasma cutting technology for mild steel introduced - TheFabricator.com

Plasma cutting technology for mild steel introduced

May 16, 2011

Kjellberg Finsterwalde has introduced Contour Cut plasma cutting technology for mild steel on its HiFocus plasma cutting systems with PerCut 200/210 and PerCut 440/450 plasma torches. On small inside and outside contours, small webs, and other fine contours, angular deviation varies between 2...

Continue Reading

Hypertherm to hold educational event May 26 at Houston's Lone Star College

May 3, 2011

Hypertherm is hosting an advanced plasma cutting educational event at Lone Star College in Houston from 8 a.m. to 2 p.m. May 26. Free for end users, the event will cover topics such as: How to become more productive and profitable Tips to extend consumables life and get the best cut every time...

Continue Reading

Plasma, oxyfuel machine designed for cutting over large working areas - TheFabricator.com

Plasma, oxyfuel machine designed for cutting over large working areas

April 25, 2011

ESAB Cutting Systems has introduced the Sabre DXG heavy-duty cutting machine for high-production plasma and oxyfuel cutting over large working areas. The modular machine features a high-stiffness welded beam assembly with dual linear ways, digital AC drives, and heavy-duty gearboxes. The gantry...

Continue Reading

Plasma machine cuts up to 0.75-in.-thick material

March 29, 2011

Thermal Dynamics®, a Thermadyne® brand, has expanded its True series of plasma cutting machines with the addition of the Cutmaster® 42. The lightweight, portable machine delivers 27 amps of output power on 120-V input and 40 amps on 230-V input. It can cut up to 0.75-in.-thick material....

Continue Reading

Plasma torches now available for upgrade

February 28, 2011

Hypertherm has announced that its Duramax™ torch series now is available for upgrade on its Powermax1000® and Powermax1250® plasma systems. The torches use a new Conical Flow™ nozzle and spring electrode to help increase consumable life up to 55 percent, according to the company. They are...

Continue Reading

What if you could significantly improve hole quality without operator intervention 5-20-10

Date: May 20, 2010

Sponsored by Hypertherm Inc.

Length: 60:00

Hypertherm invites you to learn how True Hole™ technology significantly improves plasma hole quality – without the need for operator intervention.

Hypertherm receives OSHA STAR safety status

January 10, 2011

Hypertherm has been selected as a STAR worksite by the Occupational Safety and Health Administration's (OSHA's) Voluntary Protection Program (VPP). The program recognizes organizations that have outstanding safety and health practices. Organizations must maintain injury and illness rates that are...

Continue Reading