Automation and Robotics Products

Filter Content

Drop carbide dispenser features improved deposition control

February 9, 2010

Mavrix Automatic Welding has redesigned its drop carbide dispensing system to improve the control over the rate of deposited carbide into the weld stream. Through management and regulation of incoming...

Continue Reading

Cleaning station designed for robotic GMAW guns

December 7, 2009

Arndt Enterprise Ltd. has introduced the AE-SC2CV nozzle cleaning station with pneumatic reamer, designed for manufacturers using robotic GMAW guns. The system can be used with all brands of robotic...

Continue Reading

Torches work with all GMAW robots, including hollow-wrist-style

December 7, 2009

Arndt Enterprise Ltd. has introduced TBi-Industries' robotic welding torches. The air-cooled and water-cooled torches range in capacity from 250 to 550 amps and are designed to work with all GMAW...

Continue Reading

Ultrasonic metal welding equipment introduced

November 10, 2009

Sonobond Ultrasonics has introduced two ultrasonic metal welding machines.The Dual Head SpliceRite™ can weld wire bundles with cross-sectional areas of up to 3.94 sq. in. According to the...

Continue Reading

Welding system software features updated graphical interface

October 13, 2009

Swagelok Co. has released new software for its Swagelok® welding system M200 power supply to help deliver increased performance in an updated graphical interface.The portable power supply weighs...

Continue Reading

Slim, dual-arm robot handles heavy, unwieldy parts, trays, or pallets

October 13, 2009

Motoman's new SDA10D robot has two robot arms that can work together on one task to double the payload or handle heavy, unwieldy parts, trays, or pallets. According to the company, the robot can...

Continue Reading

Heavy-duty robot supports up to 3,000-lb. payload

August 11, 2009

FANUC Robotics America Inc. has introduced the new M-2000iA/1200 super-heavy-duty robot. It can support up to a 3,000-lb. payload with a 23.62-in. offset from the faceplate and full articulated motion...

Continue Reading

Coil end welding machine accommodates strip widths 0.250 to 3 in., thicknesses up to 0.060 in.

July 14, 2009

Guild Intl. has developed a welding machine for joining coil ends on production lines producing cored wire. The HMA Welder produces complete edge-to-edge welds on all types of lines producing cored...

Continue Reading

7-axis welding robot offers improved torch access into tight places

July 14, 2009

Motoman has introduced the seven-axis VA1400 Versatile Arc welding robot. Located in the lower arm, the seventh (E) axis acts as an elbow, which helps improve torch access into tight places and allows...

Continue Reading

Packing robot features 110.3-lb. payload, 360-degree work envelope

July 14, 2009

Motoman's four-axis MPK50 robot with DX100 controller for packing applications features a 110.3-lb. payload and a 360-degree work envelope. A slim manipulator design enables it to reach into confined...

Continue Reading

Laser vision system for wind turbine tower tubes introduced

June 9, 2009

Servo-Robot has introduced the Autotrac/WT for noncontact seam tracking and adaptive SAW of wind turbine tower tubes. All the electronics have been miniaturized to reduce the equipment footprint while...

Continue Reading

Industrial PCs designed for control cabinet/housing installations

April 15, 2009

Beckhoff Automation offers the C65xx series of industrial PCs (IPCs). It is designed to be installed in control cabinets or in the rear panel of control/console housings.With TwinCAT® automation...

Continue Reading

Multipress line provides flexibility

February 2, 2009

AP&T, a supplier of automation, hydraulic presses, tools, and production lines to the sheet metal industry, has provided an automotive industry supplier with a three-press line that offers enhanced...

Continue Reading

Press hardening system makes material up to three times stronger than standard steel

February 2, 2009

AP&T, a supplier of automation, hydraulic presses, tools, and production lines to the sheet metal industry, has delivered a press hardening system to China's Baosteel. According to the company, the...

Continue Reading

Robotic safety mount useful for applications that integrate crash protection with software

January 13, 2009

The ArcSafe™-SW robotic safety mount from American Weldquip is designed for use in applications in which crash protection is integrated into the robotic software package.Most integrated robotic...

Continue Reading