- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
The Tube and Pipe Journal April/May 2006
The Tube and Pipe Journal became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry, and it has become the most trusted source of information for tube and pipe professionals.
Flushing out four-letter words: rust, dirt, and wear (Part I)
- By Mike Pelham
- Oct 10, 2006
- Tube and Pipe Fabrication
- Article
Rust, wear, and dirt cost tube fabricators and producers millions of dollars annually, and they can be the bane of tube processes. Analyzing the criteria for selecting the lubricant, cleaner, and rust preventative can help provide maximum protection.
The regrind process for tube mill tooling - Part II
- By Chris Miller
- Jun 13, 2006
- Tube and Pipe Production
- Article
Although most tube and pipe producers don't get too involved in the regrind process, it is crucial—reconditioning roll tooling can extend its useful life by 15 or 20 times. The regrind process reduces the producer's overall out-of-pocket tooling expenses, while helping to ensure the tooling continues to produce a consistent-quality product at the required speeds. A better understanding of the process, especially familiarity with the types of flaws that reconditioning can and cannot resolve, can go a long way toward a better working relationship between a tube and pipe producer and its regrind contractor.
What do you monitor to ensure quality?
- By Paul Hogendoorn
- Apr 11, 2006
- Testing and Measuring
- Article
Most manufacturers measure or test parts to verify that the parts meet quality standards. This conventional approach is time-consuming because testing adds steps and time to the production process. Furthermore, it is only as good as the sample size. A different approach to quality is to use a strain monitor to measure strain on the machine's frame. Comparing the strain with a reference (measured when the machine was known to be producing good parts) is a way to monitor the production process, and it doesn't require extra time or steps.
Eliminating problems that cause flaws
- By W.B. "Bud" Graham
- Apr 11, 2006
- Tube and Pipe Production
- Article
Problematic material? Yes, bad coil is out there. It could be mislabeled; the yield strength could vary from one part of the coil to another; it might have damaged edges; and so on. In the second part of this two-part series, columnist Bud Graham discusses steel coil, how its characteristics can vary, and how these variations can result in substandard tube.
Intelligent Robotic Welding
- By Michael Erickson
- Apr 11, 2006
- Automation and Robotics
- Article
Planning a productive intelligent robotic welding workcell requires many phases. These include preplanning with a computer simulation, getting the virtual results to translate into real-world operation, using multiple robots within the workcell for material handling as well as welding, and utilizing vision systems to help compensate for part variations.
The regrind process for tube mill tooling - Part I
- By Chris Miller
- Apr 11, 2006
- Tube and Pipe Production
- Article
Although most tube and pipe producers don't get too involved in the regrind process, it is crucial—reconditioning roll tooling can extend its useful life by 15 or 20 times. The regrind process reduces the producer's overall out-of-pocket tooling expenses, while helping to ensure the tooling continues to produce a consistent-quality product at the required speeds. A better understanding of the process, especially familiarity with the types of flaws that reconditioning can and cannot resolve, can go a long way toward a better working relationship between a tube and pipe producer and its regrind contractor.
When a good tube bends bad - Part II
- By Tony Granelli
- Apr 11, 2006
- Tube and Pipe Fabrication
- Article
Editor's note: This is the second part of a two-part article that examines tube bending defects, possible causes, and suggested remedies. Part I discusses surface defects; Part II covers other defects, such as wall thinning, ovality, buckling, and fractures. When the stress on the...
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Zekelman Industries to invest $120 million in Arkansas expansion
3D laser tube cutting system available in 3, 4, or 5 kW
Corrosion-inhibiting coating can be peeled off after use
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
HGG Profiling Equipment names area sales manager
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1