- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Shop Management - Page 273
- From The Fabricator
Michigan Manufacturing Technology Center awarded federal funding
- Feb 20, 2017
- News Release
The Michigan Manufacturing Technology Center, Plymouth, Mich., has been awarded $1.2 million over two years from the National Institute of Standards and Technology Hollings Manufacturing Extension Partnership (MEP) program for a pilot program to accelerate applied R&D, manufacturing, and technology...
- From The Fabricator
Ritter Technology acquires Primet Fluid Power
- Feb 20, 2017
- News Release
Ritter Technology LLC, Zelienople, Pa., a distributor of industrial motion and control products, has acquired Primet Fluid Power Co., Hammond, Ind. Primet sells and services hydraulic and electrical control systems principally to steel manufacturers located in the Illinois/Indiana corridor. Ritter...
- From The Fabricator
Edge gel removes soil, rust, and heat tint/weld burn
- Feb 20, 2017
- Product Release
Madison Chemical has introduced TreadBrite™ Edge Gel cleaner which removes soil, laser scale, rust, and heat-treat scale, including heat tint/weld burn, by simultaneously cleaning and brightening the surface through an etching process. The viscous gel, which contains a balanced blend of...
- From The Fabricator
Former FMA board chairman dies
- Feb 16, 2017
- News Release
David J. Barber, 69, died Feb. 13, 2017, at Lower Cape Fear Hospice and LifeCare Center after a seven-year battle with renal cell cancer. Barber served in the U.S. Army from 1969 to 1971 as a personnel management specialist. He graduated from University of Wisconsin-Whitewater and went on to a...
- From The Fabricator
Bystronic announces new representation in three southern states
- Feb 16, 2017
- News Release
Elgin, Ill.-based Bystronic Inc., a provider of laser and waterjet cutting machines, press brakes, automation equipment, and system software, has announced new distributor representation in Tennessee, Alabama, and Mississippi with the expansion of the On Point Solutions Co., a distributor partner...
- From The Fabricator
Equipment leasing and finance industry confidence levels near all-time high in February
- Feb 16, 2017
- News Release
The Equipment Leasing & Finance Foundation has released the February 2017 Monthly Confidence Index for the Equipment Finance Industry (MCI-EFI). Overall, confidence in the equipment finance market is 72.2, leveling off after January’s all-time high index of 73.4. When asked about the outlook for...
- From The Fabricator
Illegal immigration and manufacturing—a conundrum?
- By Vicki Bell
- Feb 16, 2017
- Blog Post
We all have thoughts on the prevailing concerns in the U.S. these days. Families, friendships, and marriages are breaking up over differing opinions of who should be in the White House and what should be done about various issues—Obamacare, the Keystone Pipeline and the environment in general, and immigration, particularly the current illegal population and refugees. In resolving all of these and other matters, we need to be careful not to throw the baby out with the bathwater.
- From The Fabricator
Workshops for Warriors Inaugural Gala scheduled for April
- Feb 16, 2017
- News Release
San Diego-based Workshops for Warriors will host its Inaugural Galaon April 20, 2017, aboard the USS Midway in honor of U.S. veterans. The event will include a silent auction, entertainment by the American Bombshells, and guest speakers including Medal of Honor recipient Donald "Doc" Ballard and a...
- From The Fabricator
Aqueous cleaning system handles rough to fine cleaning
- Feb 16, 2017
- Product Release
Dürr Ecoclean has developed the EcoCWave aqueous cleaning system for rough to fine cleaning. It covers parts cleaning with alkaline, neutral, and acidic media. With its small footprint, the system can be integrated in any production process. It also can adapt to changing cleanliness and throughput...
- From The Fabricator
How do you measure your shop’s performance?
- By Bill Frahm
- Feb 16, 2017
- Article
The use of operational effectiveness and efficiency (OEE) measurements is a good way to get a feel for how a manufacturing operation is performing, but further work needs to be done if a shop really wants to fix what ails it.
- From The Fabricator
10-year strategic outlook shows North American auto market headed toward instability
- Feb 16, 2017
- News Release
The North American light-vehicle market is on the verge of confronting significant changes that will lead the industry to a very precarious condition, according to the report “A Ten Year Strategic Outlook for the North American Automotive Market,” available from Commodity Inside. The once...
- From The Fabricator
Georgia Manufacturing Alliance welcomes Southwire as 2017 Innovator Sponsor
- Feb 16, 2017
- News Release
The Atlanta-based Georgia Manufacturing Alliance (GMA) has announced that Southwire Co. LLC, a wire and cable producer based in Carrollton, Ga., has joined the organization as an Innovator Sponsor for 2017. Southwire operates 32 manufacturing plants, 10 distribution facilities, and multiple sales...
- From The Fabricator
Eberl Iron Works promotes four key employees
- Feb 15, 2017
- News Release
Buffalo, N.Y.-based Eberl Iron Works has announced the realignment of staff responsibilities. Thomas A. Huber Sr., who has been with the company for nearly 36 years, has been promoted from plant supervisor to the newly created position of facilities engineer. In addition to maintaining all...
- From The Fabricator
Siemens partners with U.S. technical schools for L.E.A.P. initiative
- Feb 15, 2017
- News Release
Siemens has announced the launch of a new workforce development program for secondary and technical schools across America called L.E.A.P.—the Lifelong Educational Advantage Program. Made available through Siemens Cooperates with Education (SCE), the effort is designed to give high school and...
- From The Fabricator
Conveyor-type cleaning system offered in 42 configurations
- Feb 15, 2017
- Product Release
International Thermal Systems (ITS) has introduced the ProCon™ line of standard conveyor-type cleaning systems. It is available in 42 configurations with conveyor belt widths of 12, 18, and 30 in., from one to three stages. All stages are available as ambient or heated. Standard options include...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1
Managing Dangerous Dusts from Metalworking
- June 26, 2024
- Sponsored
- Presented By: Camfil Air Pollution Control