Editor-in-Chief
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Credit crunch not going away soon
- By Dan Davis
- July 10, 2009
When this current economic slowdown in manufacturing really got serious earlier this year, he needed access to more credit just to keep the business running. His customers were delaying payments, and he needed credit to keep the lights on and the deliveries on schedule. It took a face-to-face meeting with the banker to arrange the increased credit limit, but he finally arranged for a larger safety net.
For my friend, a couple of large orders really have made the search for more credit a distant memory. Other companies in the metal fabricating community should be so lucky.
The credit "crisis" does not grab the headlines as it once did. After all, Michael Jackson went and died. (Let's not forget the passing of Fred Travalena, ladies and gentlemen.) But dollars remain tight, and banks aren't going to change their lending practices overnight. Even now you can see the effects of these practices with larger companies.
Norm Roller, partner in the financial services firm Suby, Von Haden & Associates, Madison, Wis., believes that a metal fabricating company looking for new access to credit really has to have its act together. A fabricator needs to show the bank that steps have been taken to address cost control during a time when growing revenue may be next to impossible.
"I tell you that banks are looking at companies that are proactive and timely with delivering their information. The lines of communication have to be very open," Roller said.
Even then the access to additional credit may not be assured. Roller said that smaller companies that feasted on overrun work from larger OEMs or that were heavily aligned with one industrial segment, such as automotive, may be looked upon as unfavorable credit applicants. Banks see the larger manufacturing companies cutting their work forces and bringing work in-house that was once farmed out, and that isn't a good sign for the smaller companies down the supply chain.
Of course, metal fabricators can make their case, and they should if the alternative is passing on a golden opportunity or simply shutting the doors. If they can only wait, the credit environment might loosen up.
Roller said banks aren't likely to change their current approach for another six to nine months, but that's when many economists think an economic rebound may be firmly under way.
By that time the Michael Jackson coverage will have died down.
Also, Abe Vigoda is still alive. You know you were wondering about that.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Dan Davis
2135 Point Blvd.
Elgin, IL 60123
815-227-8281
Dan Davis is editor-in-chief of The Fabricator, the industry's most widely circulated metal fabricating magazine, and its sister publications, The Tube & Pipe Journal and The Welder. He has been with the publications since April 2002.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
Supporting the metal fabricating industry through FMA
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Fabricating favorite childhood memories
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI