- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Technology, for better or worse
- By Eric Lundin
- June 28, 2011
Long known for their 19th-century ways, the Amish keep themselves fairly isolated from the rest of the world—they don’t have much contact with people outside their communities or technologies that are too modern or fancy.
I have to confess that my knowledge of the Amish is minimal. Until this story broke, all I really knew was that they are mainly engaged in agriculture and they tend to be self-sufficient, growing or making most of what they needed to sustain themselves, generally without electricity. They have some contact with people outside their communities, selling milk, eggs, produce, and whatnot, and buying some of the things they need—tools and seed for farming, cloth for making clothes, and so on.
But that’s not accurate.
According to the Young Center for Anabaptist & Pietist Studies (Elizabethtown College, Elizabethtown, Pa.), farming is no longer the cornerstone of Amish life. “In some communities, fewer than 10 percent of the households receive their primary income from farming. This shift to nonfarm work is the biggest change in Amish society in the last century.” That’s interesting. Amish society is changing, just as the rest of society has changed.
However, unlike mainstream society, which rushed to the cities as farming jobs disappeared, the Amish remain largely rural and, although many have taken factory jobs, continue to do some small-scale farming.
And they don’t necessarily shun all modern conveniences. They look closely at how a technology is likely to affect their society, and decide whether it will work for them. An automobile would make it a little too easy for the up-and-coming generation to get a lot more exposure to the modern world—and leave—so they stick with the horse and buggy. An electric appliance wouldn’t be disruptive like an automobile would, but it would mean reliance on the utility grid, and they try to avoid such entanglements. However, solar power is allowing electricity to make some in-roads in Amish communities these days.
In other words, Amish communities are not stuck in the 19th century. They try to be as self-sufficient as possible, but they adapt.
Let’s get back to the Elizabethtown College Amish studies Web site. “In recent decades, hundreds of Amish-owned shops have sprung up in some communities. The bulk of these small family businesses produce wood products—household and outdoor furniture, gazebos, small barns, and lawn ornaments—though quilt shops, greenhouses, and bakeries have also been very successful.”
I didn’t see metal products in that list. I wonder if the Amish might be a small yet enthusiastic customer base for metal fabricating equipment, specifically manual brakes, tube benders, and pipe benders. Welding might be a problem, unless the Amish don’t mind using oxyfuel gas welding.
It might work, as long as they focus on metalworking and forget about sending illegal text messages.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Eric Lundin
2135 Point Blvd
Elgin, IL 60123
815-227-8262
Eric Lundin worked on The Tube & Pipe Journal from 2000 to 2022.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,