Senior Editor
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Innovators, gumption, and tenacity
- By Tim Heston
- June 29, 2009
This country seems to be itching for the next big thing, those game-changing innovations that drag us out of our economic malaise. General Electric Co. CEO Jeffrey Immelt knows this, and it's why his company announced a $100 million investment in an R&D center 25 miles west of Detroit. As the AP reported over the weekend, the center will employ about 1,200 engineers and scientists.
It's been awhile since we've seen true game-changing innovations out there. The last real innovation came with the personal computer and the dot-com era that ensued. During the past decade we've had "financial innovations," and we all know where those led. I equate these complex financial instruments to fancy motor oil. You need oil for an engine to run, and good oil may make a good engine run even better. But if we have a poorly designed engine, it doesn't matter how good the oil is; the thing eventually just will fall apart.
Many see the best economic engine to be product design and manufacturing. As Immelt told the Economic Club of Detroit last week, financial services made up 45 percent of earnings on the Standard & Poor's 500 index, while financial services made up only 10 percent of S&P 500 earnings a quarter-century ago. It seems we've got too much fancy oil and not enough of an engine.
Thing is, will we know we've got a great innovation when we see it? Probably not. As Chris Kuehl, economist for the Fabricators & Manufacturers Association, International, put it in a recent e-newsletter, "The vast majority of people fail to see ideas as innovative, and there are far more creativity killers than supporters."
Kuehl referred to Howard Aiken, the engineer behind IBM's Harvard Mark I, one of the first modern computers. "Don't worry about people stealing your ideas," Aiken said. "If your ideas are any good, you have to ram them down people's throats."
So where will the next big thing come from? Some, including many government officials, are placing their bets on alternative energy. My bet is that no matter where it comes from, we probably won't know it when we see it. I just hope that whoever comes up with the idea has the gumption and tenacity to cram it down our throats.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscriptionAbout the Author
Tim Heston
2135 Point Blvd
Elgin, IL 60123
815-381-1314
Tim Heston, The Fabricator's senior editor, has covered the metal fabrication industry since 1998, starting his career at the American Welding Society's Welding Journal. Since then he has covered the full range of metal fabrication processes, from stamping, bending, and cutting to grinding and polishing. He joined The Fabricator's staff in October 2007.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Trending Articles
Tips for creating sheet metal tubes with perforations
Supporting the metal fabricating industry through FMA
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Fabricating favorite childhood memories
Omco Solar opens second Alabama manufacturing facility
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI