- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Manufacturing productivity up; overall productivity down
- February 2, 2006
- News Release
- Shop Management
The Bureau of Labor Statistics of the U.S. Department of Labor today reported preliminary productivity data—as measured by output per hour of all persons—for the fourth quarter and for the full year 2005. In the fourth quarter, productivity declined 0.2 percent in the business sector and 0.6 percent in the nonfarm business sector. In both sectors, the fourth-quarter productivity decline was the first since the first quarter of 2001. When the annual averages for 2005 were compared with annual averages for 2004, productivity rose 2.6 percent in the business sector and 2.7 percent in nonfarm businesses.
Manufacturing productivity grew 3.9 percent in the fourth quarter. On an annual average basis, output per hour in the manufacturing sector posted a 4.8 percent increase in 2005. Output and hours in manufacturing, which includes about 13 percent of U.S. business-sector employment, tend to vary more from quarter to quarter than data for the aggregate business and nonfarm business sectors.
In the fourth quarter manufacturing output increased 8.4 percent and hours increased 4.4 percent. The output increase was the largest since the fourth quarter of 1997 (9.3 percent) and the hours increase was the first since the first quarter of 2004, when hours increased 2.4 percent. In the third quarter, manufacturing productivity had increased 3.7 percent, reflecting a 2.6 percent rise in output and a 1.0 percent decline in hours. In durable goods manufacturing, productivity rose 8.2 percent in the fourth quarter as output grew 13.7 percent and hours increased 5.1 percent. Among nondurable goods manufacturers, productivity decreased 1.0 percent in the fourth quarter as output rose 2.1 percent and hours at work increased 3.2 percent.
Average hourly compensation of manufacturing workers increased 1.9 percent in the fourth quarter of 2005, reflecting increases in hourly compensation of 1.2 percent in durable goods manufacturing and 2.9 percent in nondurable goods manufacturing. When the increase in consumer prices was taken into account, real hourly compensation in total manufacturing fell 1.3 percent.
Unit labor costs for the manufacturing sector fell 1.9 percent in fourth-quarter 2005. In durable goods manufacturing, unit labor costs fell 6.4 percent, and in nondurable goods manufacturing unit labor costs increased 4.0 percent.
More information can be found here.
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
JM Steel triples capacity for solar energy projects at Pennsylvania facility
Fabricating favorite childhood memories
How laser and TIG welding coexist in the modern job shop
Robotic welding sets up small-batch manufacturer for future growth
Ultra Tool and Manufacturing adds 2D laser system
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,