- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Sponsored Content
AutoForm: Introduction to State-of-the-Art Technology for Stamping Engineering & Simulation
About this Webcast
AutoForm: Introduction to State-of-the-Art Technology for Stamping Engineering & Simulation
Date:
Tuesday, October 23, 2018 1:00 PM (CST)
Length:
60:00
Presented by:
This introductory seminar provides a brief overview of the latest advanced tools focused on sheet metal stamping, helping to enable the efficient design and engineering of manufacturable components. Also addressed will be new software tools for building, validating, finalizing and troubleshooting complex stamping processes.
Attendees will experience the inner workings of these software tools, developed to manage part production start-to-finish:
- Meaningful feasibility based on part geometry using AutoForm StampingAdviser, followed by process layout and building of form tools using AutoForm DieDesigner.
- Interactive and iterative simulation of the process using AutoForm ProcessExplorer.
- Optimization of blank and trim lines using AutoForm Trim, culminating in a true and final validation of process repeatability/robustness using AutoForm Sigma.
Also highlighted: Intuitive operation, embedded stamping-industry standards and practices, interactive operation strongly enhanced through parametric associativity, very quick turnaround on development and simulation, and more.
Presenter: Bryan Lang, Senior Application Engineer, AutoForm Engineering USA, Inc.
- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,