President
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Aluminum Workshop: Determining contact tip size
- By Frank Armao
- November 21, 2014
- Article
- Aluminum Welding
Q: What is the right contact tip size for using 0.0468-in. filler wire to gas metal arc weld aluminum alloys? Some people use a tip that is one size larger (for example, a 0.0625-in. tip on 0.0468-in. wire), while others use the size the manufacturer specifies for 0.0468-in. wire. Still others use the 0.045-in. contact tips made for steel wire.
A: Remember that the main purpose of the contact tip is to transfer welding current to the wire. To do that the tip must make good electrical contact with the wire. The curve in the filler wire from the wire cast helps. It acts like a spring to keep the wire in contact with the contact tip, but if the hole in the tip is too large, you lose contact intermittently. If this happens, you’ll begin to see more burnbacks.
On the other hand, if the hole is too small, you’ll also have feeding difficulties. You can’t feed a 0.0468-in. wire through an 0.0468-in. hole. The hole diameter must be somewhat bigger than the wire diameter so that the wire feeds relatively smoothly through the hole. How much bigger? In my experience, the right hole diameter for feeding aluminum wire is 0.008 in. to 0.009 in. larger than the actual wire diameter. A clearance of 0.015 in. is too large.
So why do manufacturers make separate tips for feeding steel and aluminum wire? There are a couple of reasons. First, the standard size for aluminum wire is 0.0468 in., while that for steel wire is 0.045 in. The aluminum wire actually is slightly bigger in diameter than the steel wire. Second, the coefficient of expansion for aluminum is larger than that for steel, so the aluminum wire expands more as it is heated. So manufacturers make the bore size in contact tips made for aluminum slightly larger.
A popular misconception is that you need a larger contact tip for feeding 4043 than for feeding 5356 because 4043 expands more when it is heated. Actually, the coefficient of thermal expansion of 5356 is higher than that of 4043, but they’re close enough that you generally can use the same contact tip for both.
About the Author
Frank Armao
Aluminum Consulting Inc.
440-479-0239
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/16/2024
- Running Time:
- 63:29
In this episode of The Fabricator Podcast, Caleb Chamberlain, co-founder and CEO of OSH Cut, discusses his company’s...
- Industry Events
16th Annual Safety Conference
- April 30 - May 1, 2024
- Elgin,
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI