President
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Aluminum Workshop: Matching filler alloys with A356 aluminum
- By Frank Armao
- Updated August 8, 2023
- March 16, 2015
- Article
- Aluminum Welding
Q: I need to do a lot of welding on A356 aluminum castings. Can you tell me which filler alloy I should use?
A: Alloy 356 and its variants (A356, B356, C356) is an aluminum-silicon-magnesium (AISiMg) alloy containing about 7 percent silicon and 0.35 percent magnesium. It is heat-treatable in the same manner as 6XXX wrought alloys and is most often supplied in the T6 temper. In fact, A356 is the most commonly used aluminum casting alloy.
Welding A356 Aluminum
So how do you weld it? Welding A356-T6 is very similar to welding 6061-T6. For both alloys, the heat from welding over ages the heat-affected zone (HAZ) and reduces mechanical properties, regardless of what filler alloy you use. The correct filler metal choice depends on what, if any, heat treatment will be given to the casting after welding.
Two situations are common. The first, and most common, is the 356 casting is part of an existing component or is being assembled into a larger weldment. In this case, use either 4043, which is aluminum with 5 percent silicon added, or 4047, which is aluminum with 12 percent silicon added. Yes, the HAZ will be weakened, but this is the most typical manufacturing sequence. The reduced strength is taken into account in the design.
In the second situation, the weld strength must match that of the casting. Such cases include the welding of components that will be totally heat-treated again after welding and when welding is used to repair small defects in castings, which are then heat-treated to the T6 condition.
For such applications, it is important that the strength of the repaired area match that of the rest of the casting so that the casting does not contain strong spots or weak spots after heat treatment. In this case, use alloy 4008 filler because its chemistry closely matches that of 356. Alternatively, several filler metal manufacturers make a matching filler for 356. Once repaired with any of these fillers and heat-treated, the repaired area will blend smoothly into the casting.
About the Author
Frank Armao
Aluminum Consulting Inc.
440-479-0239
About the Publication
Related Companies
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
Aluminum MIG wires offer smooth feeding, reduced tangling
The role of flux in submerged arc welding performance
Three ESAB welding machines win Red Dot Awards for product design
Power source added to cobot welding system for simplified automation
Torch made for welding thin, conductive sheet metal
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,