The Welder - Testing and Measuring - Page 2
AI improves welding performance
Novarc Technologies’ Spool Welding Robot uses the company’s NovEye control system to inspect welds in real time and learn from that observation how to perform successful welds on its own.
-
- From The Fabricator
Is the material you ordered the material you are getting to your fab shop?
Properly identifying materials like low-alloy steels or high-alloy steels as they are delivered to a shop is a best practice for metal fabricators.
Sponsored Content
Whitepaper - Alloy Verification in Metal Fabrication: From Handheld to In Line XRF Analysis
The need for 100% measurements and alloy verification is essential for quality assurance and quality control (QA/QC) procedures in metal manufacturing. The aerospace, power generation, petrochemical, and other critical industries have QA procedures that must be adhered to throughout the supply chain.
WM-200A networked weld monitor simplifies resistance welding data capture, storage, analysis
AMADA WELD TECH INC. has released the IIoT-ready WM-200A networked resistance weld monitor, which helps simplify data capture, storage, and analysis on a networked platform.
ESAB transitions HKS weld monitoring equipment to ESAB name, colors
ESAB Welding & Cutting Products, Annapolis Junction, Md., has announced that all HKS brand equipment has been rebranded as ESAB products.
CenterLine VeriFast IA system monitors weld pin position
CenterLine (Windsor) Ltd. has launched the VeriFast IA (integrated amplifier) nut detection system for monitoring weld pin position in projection welding.
Amada Weld Tech MM-410A hand-held resistance weld checker aids troubleshooting
Amada Weld Tech has introduced the MM-410A hand-held resistance weld checker.
Olympus WeldSight app enables fast weld inspection on complex, oversized parts
The new Olympus WeldSight Remote Connect app for the OmniScan X3 phased- array flaw detector streamlines weld inspection workflow by enabling users to perform every step via WeldSight software on a PC or laptop.
-
- From The Fabricator
When manual measuring systems still do the trick for metal fabricators
In a digital world, sometimes manual measurement systems still fit the needs of sheet metal fabricators.
-
- From The Fabricator
How to prevent delays in weld nondestructive testing (NDT)
Is nondestructive testing (NDT) of welds taking longer than expected? If it is, the testing itself probably isn’t to blame.
WI-2000 weld inspection system from Xiris Automation now features Class 2 laser
Xiris Automation Inc. has released a new version of its WI-2000 weld inspection system for tube and pipe manufacturing that incorporates a Class 2 laser. This laser is not a skin or materials burn hazard, nor does it harm the human eye, so installation of the system no longer requires a laser...
Servo-Robot’s Micro-Trac laser vision system compatible with all welding processes
Servo-Robot has introduced the Micro-Trac high-speed, compact, 3D robotic laser vision system. It offers joint tracking, joint finding, weld inspection, and adaptive welding. Precise wire positioning in the joint helps ensure consistent weld quality. The system has an extensive joint library and is...
WeldSight software from Olympus helps maximize OmniScan weld analysis capabilities
Olympus has released WeldSight companion PC software for the OmniScan X3 phased array (PA) flaw detector. Compatible with conventional UT, PA, and time-of-flight diffraction acquired data, the software enables inspectors to perform thorough postinspection analyses that comply with validation...
Xiris adds special adviser
Xiris Automation, Burlington, Ont., has named Dr. Patricio Mendez as a special adviser to help the company develop new camera and inspection technologies for the welding industry. Mendez is a professor, the Weldco/industry chair in welding and joining, and director of the Canadian Centre for...
-
- From The Fabricator
Zetec webinar highlights ultrasonic inspection technology
Zetec Inc., Snoqualmie, Wash., a provider of NDT technology, has posted a 25-min., on-demand webinar on new scanning technology that helps technicians improve the efficiency and accuracy of ultrasonic inspections in oil and gas, aerospace, manufacturing, and other industrial applications. The...
subscribe now
The Welder, formerly known as Practical Welding Today, is a showcase of the real people who make the products we use and work with every day. This magazine has served the welding community in North America well for more than 20 years.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Trending Articles
1
The role of flux in submerged arc welding performance
2
Aluminum MIG wires offer smooth feeding, reduced tangling
3
Building a successful welding program from the ground up
4
Connecticut students compete in Maritime Welding Competition
5
Welding power source’s modes designed to help optimize performance
