Vice President - Tube Mill Engineering
- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Achieving faster, more efficient tube mill changeovers
- By Robert Sladky
- July 26, 2001
- Article
- Tube and Pipe Production
A changeover on a tube mill does not mean just changing the tooling. It means changing from running good tube of one size to running good tube of another size.
Many machine configurations can speed up a changeover, such as rafted sections, quick-change fasteners, etc. However, fast changeover is usually just a matter of having the mill and tooling in good dependable condition and organizing the rest of the efforts of the changeover process.
Changeover Time
How long should a changeover take? This question has no specific answer because the variables are too numerous and widespread. Not all mills are of the same configuration. Some are more operator-friendly than others. Some have more passes, which require more tooling than others. Is the mill in good, dependable condition? Some claim to change a mill over in an hour, but then spend hours, if not days, chasing all the problems the mill or tooling might have before good tubing is produced.
Other factors that affect the speed of a changeover are:
- The number of workers available for a changeover.
- The mechanical dexterity of the workers.
- The tools available to do the job.
- Organization of the tools, tooling, pieces, and parts to use on the mill.
- Adherence to specific mill changeover procedures.
- Adherence to setup procedures for the tooling as it was designed.
- Existence of tube mill operating procedures for all to follow.
The mill and tooling are fixed items that, if maintained properly, will perform the same way each time they are used. The biggest variable is the human factor—how each worker maintains, sets up, and operates the mill. One worker has a way to set up the mill, and another has a different way. Day shift has one way, and night shift has yet another.
The whole process can be predictable each time, which is why written procedures must be a part of any operation. These procedures not only allow for predictable and consistent setups but can be used for troubleshooting and for training of new personnel. This article outlines some important tube mill variables that must be identified and maintained to effectively speed up mill changeover, regardless of the equipment used.
Mill Alignment
The condition of the mill and its alignment must be reliable during a changeover. If the mill is in poor condition and out of alignment, changeover times will take longer.
Entry Equipment
The entry table has a very important job to do. It must center and guide the material to the first breakdown pass. Material introduced off-center from the start will cause problems all the way through the mill.
The following checklist can help prevent problems with the entry equipment:
- Make sure the guide rolls are in good condition, with no grooves or broken-out sections.
- Check the shafts on which the guide rolls mount for proper outside diameter (OD).
- Check the bearings of the guide rolls.
- Check the lead screw adjustment. Ensure it is tight to prevent side-to-side end play and to allow the guide rolls to hold the strip steady on center.
- Check the blocks to which the shafts mount. Make sure they are tight within the assembly.
- Ensure the table is centered with the centerline of the mill.
- Make sure the table is at the proper height.
- Ensure the table is as close as mechanically possible to the first breakdown pass.
Driven Passes
On driven passes, operators should ensure the following:
- The shaft ODs are within tolerance.
- No keyways are broken out.
- The bearings, bearing blocks, and inboard and outboard stands are tight.
- No shafts are bent.
- The top shaft is parallel to the bottom shaft in all passes.
- The shaft shoulder alignment is within tolerance from the top shaft to the bottom shaft.
- Stand-to-stand and section-to-section alignment is correct, both vertically and horizontally.
- The driven shaft sleeve inside diameters (IDs) in the outboard stands are not oversized or out of tolerance.
Side Pass Stands
On side pass stands, the shaft ODs must be within tolerance, and the shafts must be tight within the blocks to which they are mounted. The blocks also must be tight within the gibs that retain them.
In-and-out and side-to-side adjustments should be tight, with no end play. Tie bars, where used, must be in good repair, with all fastener parts intact. Units that are adjustable in height should be set to the proper metal line.
If brass washers are used on the top and bottom of the side rolls, they can be converted to thrust-type bearings. This eliminates the wear variables of the brass washers.
On "M"-style mills using solid tooling, the metal line drops, thus requiring the side roll passes to be lowered to match the new metal line. A good tooling maintenance and setup program requires that personnel know exactly how much to drop or raise the metal line of different roll sets at the time of setup. This precision not only saves valuable setup time but affects the quality of the end product as well.
Weld Box
The weld box must be in good mechanical repair, and it must be dependable. A variety of weld box configurations and features is available, so common sense must be used in evaluating the integrity of the components.
For those units in which the weld rolls are held in by clevises, extra clevises should be kept on hand with weld rolls already installed for fast setup during a changeover and for quick replacement during a run.
The metal line is affected by roll changes with certain weld box designs. The ODs of the weld rolls that are being installed, as well as how they will affect the metal line of the weld box, should be known.
The weld rolls should be set up with a plug gauge of the same diameter as the welded tube size to match the radius of the weld rolls. This is especially effective in three- and four-roll weld boxes.
Turkshead Units and Straighteners
As with the weld box, for those units with clevis-mounted rolls, extra clevises should be on hand to speed up changeovers. Once the rolls are set up with a plug gauge, they should be checked for even clearance between all rolls. The use of a plug gauge is especially effective for square and rectangular setups.
Tooling
Tooling should be organized and ready to install on the mill. Jib cranes with tooling fixtures can save time in handling tooling and help reduce operator safety risk during the removal and installation of roll sets.
Knowing the rim clearance figures from the last successful run can also save time, because the operator can start where he left off. This can help ensure that prime product is run with minimum scrap.
Proper tooling maintenance is essential in achieving faster changeovers. A program should be in place to ensure maintenance is being performed and that tooling is not just taken off the mill and put in a box or on the shelf until the next installation. This maintenance program should include more than just the tooling itself. Records should be kept of tooling prints, setup charts, rework, in-house maintenance, rim clearances, and costs.
With proper tooling maintenance, the operator should be able to answer the following questions:
- How much life is left in the tooling?
- Will the tooling complete this next run?
- In what condition are the pieces and parts, such as the spacers?
- Are the spacers the correct length?
Conclusion
No matter what type of equipment is used in a tube mill, fast changeovers depend on the steps discussed in this article. Even a company with all the latest quick-change equipment needs to perform outlined procedures in maintenance, setup, and operation to make changeover successful.
Achieving faster changeovers requires consistency and discipline. Changeover programs are often set up but then not monitored. The standards that are set in any operation require the participation of everyone involved: management, maintenance, operators, supervisors, and general laborers. All need to share in the responsibility of making the process of faster, more efficient changeovers work.
About the Author
Robert Sladky
Mill-Tech, a Division of Roll-Kraft Inc.
10940 North 142nd
Waverly, NE 68462
402-786-2601
About the Publication
subscribe now
The Tube and Pipe Journal became the first magazine dedicated to serving the metal tube and pipe industry in 1990. Today, it remains the only North American publication devoted to this industry, and it has become the most trusted source of information for tube and pipe professionals.
start your free subscription- Stay connected from anywhere
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Trending Articles
Zekelman Industries to invest $120 million in Arkansas expansion
3D laser tube cutting system available in 3, 4, or 5 kW
Corrosion-inhibiting coating can be peeled off after use
Brushless copper tubing cutter adjusts to ODs up to 2-1/8 in.
HGG Profiling Equipment names area sales manager
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,