- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 294
- From The Fabricator
Sensor measures profile angle within die cavity
- Oct 7, 2015
- Bending and Forming
- Product Release
Gasparini offers the GPS4, a sensor embedded into the press brake die that measures the profile angle within the die cavity mechanically. It is designed to combat problems with springback. The sensor allows the bending of complex shapes with Z-bends or with narrow flanges. Surface finish has no...
- From The Fabricator
Automatic crowning system added to press brake
- Oct 7, 2015
- Bending and Forming
- Product Release
Gasparini has introduced the X-Press press brake with ACSG active crowning. A sensor in the ram detects bowing. Cylinders in the table raise the die, while another sensor measures the height. When the two values are equal, punch and die are at the same distance, and the profile has a constant angle...
- From The Fabricator
Tool coating extends life of punch press tooling
- Oct 7, 2015
- Punching and Other Holemaking
- Product Release
Mate’s new SuperMax™ is a hard, wear-resistant, lubricious coating for punch press tooling. It acts as a barrier between the punch and sheet metal to help improve stripping, reduce galling and slug pulling, and extend tool life. The proprietary coating outperforms currently available...
- From The Fabricator
CMM software inspects 3-D CAD models, physical parts
- Oct 6, 2015
- Testing and Measuring
- Product Release
Nikon Metrology has introduced CMM-Manager 3.5 software for its iNexiv vision measuring equipment. It works with vision measuring, autofocus laser scanning, rotary indexing, and touch probing to provide a 3-D, multisensor system for both physical products and 3-D CAD models. The software can...
- From The Fabricator
Foot warmers offer seven hours of warmth
- Oct 6, 2015
- Shop Management
- Product Release
Ergodyne has introduced N-Ferno® disposable foot warmers (model 6995). The disposable, one-size-fits-all foot warming pack provides additional heat inside footwear. Workers activate the foot warmers by opening the pack. The all-natural ingredients heat up quickly as soon as they come in contact...
- From The Fabricator
Software system simplifies PPE management
- Oct 6, 2015
- Safety
- Product Release
3M has developed Active Safety, a PPE management software system. The software is designed to help environmental, health, and safety (EHS) professionals reduce the time they spend on paperwork, access data when and where they need it, and identify trends. The system uses RFID tags and...
- From The Fabricator
Caster designed to reduce operator fatigue
- Oct 6, 2015
- Shop Management
- Product Release
Caster Concepts Inc. has unveiled the Swivel on Swivel (SoS) caster, designed with two kingpinless, maintenance-free swivel section rigs to help reduce operator fatigue. The caster reduces the amount of force needed to turn and maneuver a cart and to start rolling a cart when all the wheels are...
- From The Fabricator
Self-clinching threaded fasteners designed for close-to-edge placement
- Oct 5, 2015
- Assembly and Joining
- Product Release
PennEngineering® offers variations of PEM® self-clinching nuts, studs, and standoffs designed to allow for close-to-edge placement in thin metal assemblies without compromising the host sheet or fastener. Their engineering reduces the standard minimum distance for hole-centerline-to-edge required...
- From The Fabricator
Lift magnets lift up to 6,600 lbs.
- Oct 5, 2015
- Materials Handling
- Product Release
Techniks offers EZ-Lift magnets for loading and unloading ferrous stock, including plate, block, and round steel and press molds. The user centers the magnet on the metal to be lifted and turns the lever to engage the magnet. The units feature rare-earth magnets rated to lift up to 6,600 lbs....
- From The Fabricator
Inverted three-rail conveyor keeps large loads level
- Oct 5, 2015
- Materials Handling
- Product Release
Jervis B. Webb Co., a subsidiary of Daifuku North America Holding Co., offers the Unibilt® inverted three-rail conveyor. The three rails improve the conveyor’s stability when navigating horizontal turns and vertical curves. On vertical curves, the conveyor moves similar to an escalator...
- From The Fabricator
XRF analyzer designed to simplify metal chemistry analysis
- Oct 5, 2015
- Testing and Measuring
- Product Release
Thermo Scientific offers the Niton XL5 analyzer, designed for assessing the chemical composition of metals. According to the company, it is the smallest, lightest-weight XRF alloy analyzer on the market. Weighing 2.8 lbs., the analyzer enables operators to access difficult-to-reach areas and...
- From The Fabricator
Positioning system software allows editing of multiple cut lists
- Oct 2, 2015
- Sawing
- Product Release
TigerStop offers TigerTouch software for ferrous and nonferrous metal processing. A TigerStop positioning system coupled with the software allows operators of sawing, punching, and drilling equipment to import, view, and edit multiple cut lists. It provides a visual representation of the actual...
- From The Fabricator
Compact CMM offers new integration options
- Oct 1, 2015
- Testing and Measuring
- Product Release
Hexagon Metrology has announced new options for the latest version of its Tigo SF shop floor CMM that enable simple integration into fully automated inline or near-the-line inspection cells or into a complete production/inspection setup. With a measurement volume of 19.69 by 22.83 by 19.69 in....
- From The Fabricator
Co-extrusion crosshead for irrigation tubing offers two-stage clamping
- Oct 1, 2015
- Shop Management
- Product Release
Guill Tool has introduced series 824, a co-extrusion crosshead designed for irrigation tubing with an emitter tool. Manufactured from stainless steel, the crosshead features balanced flow design with spiral technology that helps improve flow characteristics at all extruder speeds. Dual feed...
- From The Fabricator
Membrane dryer’s four-stage prefiltration produces ultradry air
- Oct 1, 2015
- Shop Management
- Product Release
The WNA AMD-035 membrane dryer from Walmec North America has a four-stage prefiltration to produce ultraclean, ultradry air for compressed-air applications. The first- and second-stage filters remove moisture, liquids, dust, rust, and scale to 5 microns. An automatic float drain under the...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1
Managing Dangerous Dusts from Metalworking
- June 26, 2024
- Sponsored
- Presented By: Camfil Air Pollution Control