- FMA
- The Fabricator
- FABTECH
- Canadian Metalworking
Our Publications
Categories
- Additive Manufacturing
- Aluminum Welding
- Arc Welding
- Assembly and Joining
- Automation and Robotics
- Bending and Forming
- Consumables
- Cutting and Weld Prep
- Electric Vehicles
- En Español
- Finishing
- Hydroforming
- Laser Cutting
- Laser Welding
- Machining
- Manufacturing Software
- Materials Handling
- Metals/Materials
- Oxyfuel Cutting
- Plasma Cutting
- Power Tools
- Punching and Other Holemaking
- Roll Forming
- Safety
- Sawing
- Shearing
- Shop Management
- Testing and Measuring
- Tube and Pipe Fabrication
- Tube and Pipe Production
- Waterjet Cutting
Industry Directory
Webcasts
Podcasts
FAB 40
Advertise
Subscribe
Account Login
Search
Products - Page 362
- From The Fabricator
Renewable-waste cutting fuel cuts faster than acetylene
- Jul 30, 2014
- Shop Management
- Product Release
MagneGas Corp. has launched MagneGas® 2, a second-generation cutting fuel made from renewable waste. Independent tests performed by EWI on track-based cutting systems showed that, in comparison to acetylene, the fuel had 38 percent faster cutting speeds on 2-in. carbon steel and about a 34 percent...
- From The Fabricator
Weld cleaning brush’s dual-hex nut eliminates interference issues
- Jul 30, 2014
- Power Tools
- Product Release
The DUALLY® stringer-bead wheel from Weiler features a nut with a hex on each side of the wheel that is tall enough to ensure adequate clearance on the tool. This dual-hex nut design eliminates interference issues that might otherwise tempt users to remove the guards from their angle grinders and...
Circular saw makes straight, miter cuts on bars, tubes, structural workpieces
- Jul 29, 2014
- Sawing
- Product Release
Pat Mooney Inc. offers the OMP KR3 fully automatic circular miter saw. It is designed for production sawing applications requiring straight and miter cuts on bars, tubes, and structural workpieces. Its upcut design provides a cutting capacity of 8.5 in. and the ability to cut angles in the...
- From The Fabricator
Test system detects defects as small as 5 percent of tube wall
- Jul 29, 2014
- Testing and Measuring
- Product Release
Magnetic Analysis Corp. has developed a 19.6-in. transverse/longitudinal flux leakage Rotoflux® test system for a new tube mill at an OCTG producer in Russia. It is designed to detect seams, laps, pits, scabs, rolling skins, cracks, weld line defects, and transverse and longitudinal defects as...
- From The Fabricator
Auto-indexing dimpler prevents multiple-blank feeds in stamping
- Jul 29, 2014
- Bending and Forming
- Product Release
Welker Engineered Products offers an auto-indexing dimpler that protects dies by minimizing the potential for multiple-blank feeds in stamping operations. It prevents sheet metal blanks from sticking together by producing a pattern of small dimples in the trim edge that automatically index with the...
- From The Fabricator
Solvent-based cleaning system allows ultrasonic and filtration simultaneously
- Jul 29, 2014
- Finishing
- Product Release
Dürr Ecoclean offers the EcoCCore system for solvent-based parts cleaning, designed for operations with nonhalogenated hydrocarbons or modified alcohols under full vacuum conditions. Standard equipment includes two flood tanks, heat recovery, and full-flow plus bypass filtration capabilities....
Composite system repairs steel pipes/pipelines
- Jul 29, 2014
- Tube and Pipe Fabrication
- Product Release
Henkel offers the Loctite® composite repair system for steel pipes and pipelines, which meets the requirements of the ISO/TS 24817 global quality standard. The heart of the new all-in-one repair system is a composite material made of resin reinforced with fibers. In steel pipelines, the...
- From The Fabricator
Workstation combines multiple assembly operations
- Jul 28, 2014
- Assembly and Joining
- Product Release
The Creform® Corp. has developed a new workstation that combines multiple assembly operations into single units, eliminating unnecessary steps for assemblers. The system includes individual workstations that are serviced by material handlers. They are built so each assembler has everything...
- From The Fabricator
CMMS schedules maintenance through automated meter reading
- Jul 28, 2014
- Shop Management
- Product Release
Production Process has released the ProductionACE/CMMS, an entry-level CMMS with companion run-hour and cycle count meters that connect to production and auxiliary equipment. The system identifies when maintenance is near due and due based on user-set limits for run hours and cycle count for...
- From The Fabricator
Brochures assist selection of metal detection, magnetic separation equipment
- Jul 28, 2014
- Materials Handling
- Product Release
Through its Orange University® educational program, Eriez® offers a series of “How to Choose and Use” brochures designed to assist readers in selecting and using the appropriate equipment to conquer their toughest metal contamination and material handling challenges. Topics include...
- From The Fabricator
Compact cutting systems equipped with CO2 or fiber laser
- Jul 28, 2014
- Laser Cutting
- Product Release
Knuth has introduced the Laser-Jet 1512 and 2512 laser cutting machines. The compact cutting systems can be equipped with either a CO2 or fiber laser. Parts can be produced individually and unloaded directly at the machine. In addition, a sheet of material that has been used for a single part can...
- From The Fabricator
Machine delivers double-sided deburring in one pass
- Jul 28, 2014
- Finishing
- Product Release
CS Unitec’s Rolei BE 5 deburring machine performs double-sided deburring of stainless steel and aluminum sheets up to 0.2 in. thick in a single pass with no additional treatment. Two abrasive flap wheels rotate in opposite directions to grind both sides of the metal as it passes through. The...
- From The Fabricator
Metalworking handbook provides essential information for students
- Jul 24, 2014
- Shop Management
- Product Release
Industrial Press offers Shop Reference for Students and Apprentices. The compact, 550-page spinoff of Machinery’s Handbook provides essential information for students preparing for jobs in the metalworking industry, from the ability to understand and use shop mathematics to the reading and...
- From The Fabricator
Ferrous powders provide extreme wear resistance
- Jul 24, 2014
- Metals/Materials
- Product Release
The NanoSteel® Co. has introduced ferrous powders designed to extend steel’s capabilities in near-net-shape wear parts for highly abrasive environments. The alloys feature hardnesses higher than 1,400 HV, wear resistance of less than 10 mm3 volume loss, and spherical morphology that results in...
- From The Welder
Hybrid welding process welds thick metal sheets quickly
- Jul 23, 2014
- Laser Welding
- Product Release
Laser Zentrum Hannover e.V. has developed a hybrid welding process that allows the welding of thick pipelines and metal sheets made of aluminum alloys or steel at speeds of 19.69 and 4.92 FPM, respectively. The process can be used to make single-sided, zero-defect welds on aluminum sheets up...
subscribe now
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
start your free subscription- Podcasting
- Podcast:
- The Fabricator Podcast
- Published:
- 04/30/2024
- Running Time:
- 53:00
Seth Feldman of Iowa-based Wertzbaugher Services joins The Fabricator Podcast to offer his take as a Gen Zer...
- Industry Events
Pipe and Tube Conference
- May 21 - 22, 2024
- Omaha, NE
World-Class Roll Forming Workshop
- June 5 - 6, 2024
- Louisville, KY
Advanced Laser Application Workshop
- June 25 - 27, 2024
- Novi, MI
Precision Press Brake Certificate Course
- July 31 - August 1, 2024
- Elgin,
- Upcoming Webcasts
Navigating Change: The Manufacturer’s Guide to Change Management with ERP Implementation
- May 16, 2024
- Sponsored
- Presented By: ECI Software Solutions, M1
Managing Dangerous Dusts from Metalworking
- June 26, 2024
- Sponsored
- Presented By: Camfil Air Pollution Control