Shearing

Shearing, a tried-and-true technology, is still necessary in fabrication shops everywhere. Read up on the machines and blades in this technology area.

Filter Content

High Steel installs new stretcher leveler line

November 5, 2012

High Steel, Lancaster, Pa., has installed a 72- by 0.500- in. by 60,000-lb. SUREGRIP® stretcher leveling line from Red Bud Industries. The new line consists of an inline stage and load system, dual stub uncoiler, heavy-gauge peeler/breaker, crop shear, dual roller levelers, adjustable stretcher...

Continue Reading

Punching/shearing system features standard layout marking - TheFabricator.com

Punching/shearing system features standard layout marking

October 30, 2012

Voortman has introduced the new V550-6 punching and shearing system for flat and angle steel processing. With six punches available, the system features a large-capacity hydraulic pump to make it the fastest punch in the market, according to the manufacturer. Layout marking is a standard...

Continue Reading

LVD Strippit names manufacturing manager, assembly supervisor

October 16, 2012

LVD Strippit, a manufacturer of metal forming equipment in Akron, N.Y., has announced additions to its manufacturing management team. Lieven Decloedt has been named to the position of manufacturing manager. In this role, he is responsible for leading all machine shop, assembly, and manufacturing...

Continue Reading

Cincinnati Incorporated appoints regional sales engineer

October 1, 2012

Cincinnati Incorporated, Cincinnati, has named Darren Bobbitt as regional sales engineer for Arkansas and Oklahoma. Bobbitt, a 10-year veteran of manufacturing, holds a bachelor's degree in mechanical engineering from the University of Arkansas at Little Rock. Cincinnati Incorporated provides...

Continue Reading

Delta Steel Technologies announces staff appointments

September 13, 2012

Delta Steel Technologies, Irving, Texas, has named Enrique E. Echaniz as international business development manager and Michael Prete as regional sales manager. Echaniz has 23 years of experience in the steel industry with an emphasis on stainless steel. In this role, he develops and manages...

Continue Reading

Coe delivers cut-to-length line to Fanasa - TheFabricator.com

Coe delivers cut-to-length line to Fanasa

June 14, 2012

Coe Press Equipment, Sterling Heights, Mich., has announced the installation of a cut-to-length line at Fanasa in Santa Catarina (Nuevo Leon), Mexico, a facility dedicated mainly to stampings and assemblies for the industrial and appliance markets. The new line comprises a CPRF-SM4 48-in....

Continue Reading

Box, pan brake/shear combination machines bend four or more part sides - TheFabricator.com

Box, pan brake/shear combination machines bend four or more part sides

June 12, 2012

Preferred Metalfab Inc. has introduced its new box and pan brakes and brake/shear combination machines. The units feature the same options and capacities as the company's other machines, but with removable fingers for bending four or more part sides to make complex and unusual...

Continue Reading

Fabrication machines accomplish variety of punching, forming tasks - TheFabricator.com

Fabrication machines accomplish variety of punching, forming tasks

May 3, 2012

Kalamazoo Metal Muncher offers two basic types of Metal Muncher machines. The series MM is a complete five-station fabrication center in a single unit, designed for productivity in a smaller footprint than two separate machines. Its two-cylinder, two-person operation enables the punch and shear...

Continue Reading

COMEQ names vice president of sales - TheFabricator.com

COMEQ names vice president of sales

May 2, 2012

COMEQ Inc., White Marsh, Md., the exclusive distributor for Geka, Safan, Primeline, Americor, and Parmigiani fabricating and sheet metal machinery, has announced the appointment of Eric Lenhart as vice president of sales. In this position, he works with staff to foster closer relationships with...

Continue Reading

Ermaksan introduces fiber laser, hybrid press brake at open house - TheFabricator.com

Ermaksan introduces fiber laser, hybrid press brake at open house

April 12, 2012

Ermaksan held an open house Feb. 29-March 1 at its new plant in Bursa, Turkey, to introduce the Fibermak fiber laser cutting machine and the Evo II hybrid press brake. Two hundred guests from 90 companies in 40 countries attended the event. According to comments at the event from Ahmet Ozkayan,...

Continue Reading

LVD Strippit appoints sales engineer - TheFabricator.com

LVD Strippit appoints sales engineer

April 12, 2012

LVD Strippit, Akron, N.Y., has named Dean Arneson to the position of sales engineer. Based in Andover, Minn., he is responsible for the sale of the company's sheet metal and plate working machines and software in Minnesota, North Dakota, South Dakota, and northern Iowa. Arneson worked...

Continue Reading

Shearing/flanging machine offered - TheFabricator.com

Shearing/flanging machine offered

March 22, 2012

Cole-Tuve Inc. offers the model EFM combination shearing/flanging machine with up to 0.25- by 118-in. capacity in steel and aluminum and up to 0.16 in. in stainless steel. It is designed for flat and crowned, round and elliptical, and double D heads and bottoms and other nonsymmetrical shapes....

Continue Reading

Ironworker includes integrated press brake - TheFabricator.com

Ironworker includes integrated press brake

March 21, 2012

Trilogy Machinery Inc. offers the Sunrise IW-66KB ironworker. It includes an integrated 12-in. press brake with a separate foot pedal for bending operations, a multi-V lower die, a worktable, and a 24-in. gauging system. Features include vertical frame design, 4-in. angle capacity, and 14-in....

Continue Reading

Hydraulic system improved in dual-operator ironworkers - TheFabricator.com

Hydraulic system improved in dual-operator ironworkers

March 12, 2012

Scotchman Industries is installing a new hydraulic system in three of its Dual Operator model ironworkers. According to the company, the change increases the machines' cycle times by more than 40 percent. The hydraulic system is designed to ensure full hydraulic pressure and speed to both...

Continue Reading

Dry-cut saw designed for cutting tubes, solids - Shearing Tech Cell - TheFabricator.com

Dry-cut saw designed for cutting tubes, solids

March 5, 2012

Tru-Cut Saw has introduced a line of dry-cut metal saws. The model TC16DC is suitable for sample cutting, industrial applications, and fabrication shops. The machine features a two-speed, 3-HP motor; 45-degree left and right miter cutting; self-centering vise; laser cutting guide; and chip...

Continue Reading