Viking Blast & Wash Systems

Viking Blast & Wash Systems has released the 600R tumble blaster with a 6-cu.-ft. capacity and 900-lb. belt load capacity. The machine has 27-in.-dia. barrelheads and 37 in. across the blast chamber. The cabinet is fully lined with replaceable, wear-resistant liners. A vertical pneumatically...

Viking Blast & Wash Systems has released the MR6016 monorail blast system with a blast zone of 60 in. tall by 16 in. wide. Parts are presented to the blast wheels, arranged to expose all surfaces of the work, with a customer-provided monorail conveyor. As parts pass through, the four 15-HP VK...

Viking Blast & Wash Systems offers the T120 Table Blaster, constructed of ½-in. plate steel. A removable safety screen protects the abrasive system from oversize contaminants. The doors are gasketed to provide a positive seal during operation. A pneumatically controlled latch locks the door closed...

Viking Blast & Wash Systems has released the SH3250 I-Track spinner hanger blaster. The unit, which has a 32-in.-wide by 50-in.-tall blast zone, eliminates the need for a lower screw auger. The cabinet is made of 3/8-in. AR and is lined with ½-in.-thick cast chrome/moly liners. It can be fitted...

Viking Blast & Wash Systems has introduced the 2400 rubber belt blaster. It has a 24-cu.-ft. capacity, holding up to 1,800 lbs., and comes with the heavy duty 2400L loader. Options include a vibratory take-away conveyor and a rubber belt version. The unit is equipped with the Viking Guard belt...

Viking Blast & Wash Systems has introduced the redesigned SH3660 spinner hanger blaster. This unit has an expanded 36-in.-wide by 60-in.-tall work zone. The need for a lower screw auger has been eliminated. The machine has two separate compartments in the rotating drum; one compartment is rotated...

Viking Blast & Wash Systems has released the 120T table blast system. The unit has two doors for simplified access. The blast cabinet is constructed of ½-in. plate steel cut with a V-slot for loading and unloading access for an overhead crane. A removable safety screen protects the abrasive...

Viking Blast & Wash Systems has introduced the GC-440 pass-through cylinder blaster. The machine cleans about 375 gas cylinders in an eight-hour day on a continuous flow-through basis. The entrance and exit table holds eight cylinders for staging at each end. The unit is designed for cylinder...

Viking Blast & Wash Systems has released the RT 9618 pass-through blaster. The redesigned unit has a blast area of 96 in. wide by 18 in. tall. The blast wheels are arranged to blast leading and trailing edges of the work area. The unit also incorporates starters with phase loss and imbalance...

Viking Blast & Wash Systems has released the newly redesigned RW 2836 parts washer. It features a 7.5-HP, reservoir-mounted, vertical, centrifugal pump with about 65-GPM pump capacity at about 60-PSI pressure. The pump has no bearings, seals, or gaskets to replace. The rotating work basket...

Viking Blast & Wash Systems has released the newly redesigned RW7272 parts washer. It features a 25-HP, reservoir-mounted, vertical centrifugal pump that provides about 250-GPM capacity at about 105 PSI. The pump has no bearings, seals, or gaskets to replace. The rotating work basket measures...

Viking Blast & Wash Systems has released the MR106-94 monorail blast system. The redesigned unit has a 106- by 94-in. blast zone. Blast wheels are arranged to expose all work surfaces. The parts are presented to the eight 15-HP VK PowerMax 1500 direct-drive blast wheels with a customer-provided...