Tube and Pipe Fabrication Products

The tube and pipe fabrication technology area covers sawing (band, circular, and friction) and other cutting processes, such as abrasive, flame, laser, oxyfuel, plasma, and waterjet. It also discusses forming processes, including bending and end forming. Finally, it includes a handful of miscellaneous processes, such as trimming, beveling, finning, grooving, threading, and spinning.

Filter Content
End prep tool features air power-assisted clamping - TheFabricator.com

End prep tool features air power-assisted clamping

May 23, 2011

The MILLHOG® Mongoose Air Clamp™ end prep tool from Esco Tool features air power-assisted clamping for instant attach and release to the tube or pipe ID. Developed for repetitive end preps on tubes from 0.5 to 3 in. OD, the tool is suitable for use on boiler panels in limited-access...

Continue Reading

Air-driven pipe cutter also performs horizontal front cutting - TheFabricator.com

Air-driven pipe cutter also performs horizontal front cutting

May 2, 2011

Delivering 1.75 HP at 12,000 RPM, the new air-powered Titan 150™ from Pipeline Renewal Technologies cuts almost any pipe or liner material quickly and cleanly. With two-axis articulation, its cutter arm reaches up 9 in. and sweeps 400 degrees; it also performs horizontal front cutting....

Continue Reading

Portable end prep tool designed to remove simply from tube and not catch on burrs - TheFabricator.com

Portable end prep tool designed to remove simply from tube and not catch on burrs

April 5, 2011

Esco Tool’s Ground MILLHOG® is a right-angle-drive, air-powered, portable welding end prep tool that features a clamp rib assembly incorporating a captive internal band and smooth clamp ribs. The ID clamping tool removes simply from the tube, does not catch on burrs, and is unaffected...

Continue Reading

Portable machine bevels pipe from 1.5 to 10 in. in diameter - TheFabricator.com

Portable machine bevels pipe from 1.5 to 10 in. in diameter

March 21, 2011

Steelmax Tools LLC has introduced the PRO 10PB/PBE portable pipe beveling machine. Available in pneumatic and electric versions, the machine can bevel pipe diameters from 1.5 to 10 in. Its lightweight, compact design allows it to be set up and operated by a single user. Using a self-centering,...

Continue Reading

Welding machine designed for pipeline, construction, maintenance applications

March 14, 2011

Lincoln Electric has introduced the new SAE-300® engine-driven welding machine, designed for pipeline welding, as well as construction and maintenance applications. The new machine features the company's Dual Continuous Control™ technology, which allows the adjustment of two dials on the...

Continue Reading

Pipe clamp has adjustable T-handle for positioning in tight locations - TheFabricator.com

Pipe clamp has adjustable T-handle for positioning in tight locations

February 17, 2011

H&M Pipe Beveling Machine Co. Inc. has introduced the Easy-Fit pipe clamp for precision fit-up of flanges, fittings, and pipe-to-pipe alignment. The two-handed handle locks positively in place, and an adjustable T-handle slides back and forth for positioning in tight locations. Features...

Continue Reading

Boring tool system supports spindle speeds up to 6,600 SFM

February 7, 2011

Big Kaiser has introduced the new, large-diameter Kaiser 318 series, a complete tooling system supporting aluminum and steel components for twin-cutter rough boring, precision finish boring, and precision OD turning operations. The system bores from 7.87 to 13.39 in. OD for ISO40/HSK-A63 tapers,...

Continue Reading

Tube fabricating tool package suitable for installing CPI™, A-LOK® fittings - TheFabricator.com

Tube fabricating tool package suitable for installing CPI™, A-LOK® fittings

February 7, 2011

Parker Hannifin Corp. offers a package of heavy-duty, hand-operated tube fabrication tools for small-bore tube assembly. The tools can be used to install both CPI™ and A-LOK® tube fittings in various system applications. The package includes several tools: *Heavy-duty PTB tube...

Continue Reading

All-electric tube bender holds up to eight tool sets - TheFabricator.com

All-electric tube bender holds up to eight tool sets

January 31, 2011

The ELECT XL™ all-electric, 12-axis tube bending machine from BLM Group USA is designed to bend tubes up to 6 in. in diameter. The multistack bender holds up to eight tool sets, permitting rapid processing of complex parts and quick changeover, according to the manufacturer. It can be...

Continue Reading

Kit comprises variety of pipe fitting tools

January 24, 2011

Sumner Mfg. offers the new Fit Kit 2- to 12-in. tool package, comprising a variety of pipe fitting tools. The kit contains four Fold-A-Jacks®; one 2- to 6-in. Ultra Clamp; one 2- to 6-in. Ultra Fit; one 5- to 12-in. Ultra Clamp; one 5- to 12-in. Ultra Fit; one each of the 2- to 4-in., 4- to...

Continue Reading

Welding end prep tool suitable for cutting high-chrome-content boiler tubes, stainless steel, and tubes with overlay - TheFabricator.com

Welding end prep tool suitable for cutting high-chrome-content boiler tubes, stainless steel, and tubes with overlay

January 17, 2011

Esco Tool offers the Mongoose MILLHOG® right-angle-drive, ID-clamping welding end prep tool. It features a 1.25-HP motor with a reduction drive gear that produces 240 lbs. of torque at 100 RPM. Suitable for cutting high-chrome-content boiler tubes, stainless steel, and tubes with overlays,...

Continue Reading

Angle roll has 6-in. pipe, 6-in. bending capacity - TheFabricator.com

Angle roll has 6-in. pipe, 6-in. bending capacity

January 3, 2011

Carell Corp. has introduced the 310HV4 angle roll with 6-in. pipe and 6-in. angle bending capacity. The three-driven-roll, double-initial-pinch, fully hydraulic universal roll bending machine has independent hydraulic adjustment of both lower bending rolls and hydraulic powered rotation of all...

Continue Reading

Beam manipulator helps keep welders safe while working on beams - TheFabricator.com

Beam manipulator helps keep welders safe while working on beams

December 6, 2010

SMS Inc. has developed the Rimco Rotator for keeping welders safe while working on beams. It comprises a pair of clamshell wheels that mount and lock around the ends of a beam. The wheels sit in motorized rotator bases that can be fixed to the shop floor, mounted on rails, or left freestanding...

Continue Reading

Tool separates fin from tube OD in one step - TheFabricator.com

Tool separates fin from tube OD in one step

November 8, 2010

The MILLHOG® fin tube removal tool from Esco Tool features a patented blade design that separates the fin from the OD of a tube in one step. Capable of peeling back 4 in. of fin in less than 2 min., the rigid ID-clamping tool has no reaction torque, requires no cutting fluids, and eliminates...

Continue Reading

Two-axis CNC cutting machine, cuts/profiles pipe from 1 to 12in. OD up to 40 ft. long

September 21, 2010

The new MasterPipe™ profiler from Vernon Tool™ is a two-axis, CNC pipe cutting machine capable of cutting and profiling pipe from 1 to 12 in. OD and up to 40 ft. long. Powered by the company's WinMPM Microsoft® Windows®-based operating system, the machine consolidates setup, programming, and...

Continue Reading