Bending Products

The bending technology area includes all manner of machines and processes for bending sheet metal, including press brakes, folders, panel benders, corner formers, ironworkers, notchers, orbital formers, and roll benders. It also has information on accessories such as gauging and backgauging systems.

Filter Content
Press brake combines features of hydraulic, electric, hybrid systems - TheFabricator.com

Press brake combines features of hydraulic, electric, hybrid systems

June 11, 2012

Salvagnini offers the B3 KinEtic press brake. According to the company, the machine can reach speed and power levels similar to those of a hydraulic press brake while delivering the accuracy of an electric press brake and maintaining the consumption of a hybrid system, all managed by the...

Continue Reading

Quick-change tooling enables tube benders to be reconfigured in minutes

April 26, 2012

Unison has launched a quick-change tooling system that speeds tooling changes on its all-electric tube bending machines. Available from Horn Machine Tools, the system covers all of the tooling components on the machine and includes bar code identification to verify the changeover process. On a...

Continue Reading

Separator integrated into bending tool to reduce tube cutting waste - TheFabricator.com

Separator integrated into bending tool to reduce tube cutting waste

April 23, 2012

Schwarze-Robitec has developed a new separator integrated directly into the bending tool for bending and separating in one stage. To allow bending of short components, the parts to be bent generally are extended artificially with span and supporting lengths. After bending, the additional...

Continue Reading

Plate bending rolls feature direct-drive design

March 26, 2012

Trilogy Machinery has added a direct-drive design to its Lemas three- and four-roll plate bending rolls. The four-roll, double-pinch plate bending rolls have no belts or chains, as the drive motor is coupled directly to the bending rolls, offering 100 percent power and torque. The universal joint...

Continue Reading

Ironworker includes integrated press brake - TheFabricator.com

Ironworker includes integrated press brake

March 21, 2012

Trilogy Machinery Inc. offers the Sunrise IW-66KB ironworker. It includes an integrated 12-in. press brake with a separate foot pedal for bending operations, a multi-V lower die, a worktable, and a 24-in. gauging system. Features include vertical frame design, 4-in. angle capacity, and 14-in....

Continue Reading

Adjustable V die allows press brake bending of angles to 50 degrees - TheFabricator.com

Adjustable V die allows press brake bending of angles to 50 degrees

March 14, 2012

LVD Strippit nv offers the Vari-Vee V30-140 CNC, adjustable V die for its PPEB and Easy-Form® precision press brakes. The variable, adjustable-bottom V die is designed for use with press brakes from 320 to 1,000 tons and up to 315 in. long. The die provides automatic adjustment of the V...

Continue Reading

Bender produces 4,000 hairpins per hour - TheFabricator.com

Bender produces 4,000 hairpins per hour

March 14, 2012

The new SD-VBHB small-diameter vertical hairpin bender from Burr Oak Tool Inc. produces eight parts per cycle for a throughput capacity of up to 4,000 hairpins per hour. The compact machine, with a size reduction of 102 sq. ft. from the previous design, uses less floor space. The new bender...

Continue Reading

Servo-electric press brake introduced - TheFabricator.com

Servo-electric press brake introduced

February 7, 2012

Prima Power has introduced the eP-series press brake. The Electro CNC and servo-electric drive system provide high acceleration, deceleration, and fast response times, the manufacturer reports. The pulley-belt system distributes the force over the whole bending length to prevent upper tool...

Continue Reading

Press brake series expanded to offer machines up to 700 tons - TheFabricator.com

Press brake series expanded to offer machines up to 700 tons

February 7, 2012

LVD Strippit has expanded its PPEC series of midrange, precision hydraulic press brakes to offer machines up to 700 tons. The higher-tonnage models provide heavier forming capacity and expand the line with machines from 39 tons in bend lengths up to 265 in. The machines are equipped with the...

Continue Reading

Electric coil form machine handles round, flat-tube coils up to 60 in. wide, 9.84 ft. long - TheFabricator.com

Electric coil form machine handles round, flat-tube coils up to 60 in. wide, 9.84 ft. long

January 26, 2012

Burr Oak Tool Inc. offers an electric coil form machine for producing bends in single-row coils or multiple single-row coils joined at one end. The machine handles round and flat-tube coils up to 60 in. wide and 9.84 ft. long for large, commercial HVAC/R applications. A single, vertically...

Continue Reading

Semiautomatic mandrel bender has bending capacity to 3-in. round tube, multiple profiles - TheFabricator.com

Semiautomatic mandrel bender has bending capacity to 3-in. round tube, multiple profiles

January 23, 2012

CML USA has introduced the Ercolina® TM76 mandrel bender with a bending capacity to 3 in. round tube and multiple profiles. It is capable of bends to CLR as small as 1.5D, with USB offering unlimited storage of bend programs, material library, and job information. The machine is suitable...

Continue Reading

CNC press brake accommodates all types of punches and dies with appropriate adapters - TheFabricator.com

CNC press brake accommodates all types of punches and dies with appropriate adapters

December 6, 2011

The latest version of Bystronic's midrange Xact CNC-synchronized press brake incorporates the Windows® XP 2-D graphics-based Cybelec DNC 880S control system, capable of selecting bend sequences automatically. The press brake, which features an optional four-axis backgauge, allows standard...

Continue Reading

Precision press brake produces small bent parts up to 40 in. - TheFabricator.com

Precision press brake produces small bent parts up to 40 in.

October 31, 2011

TRUMPF's TruBend series 7000 precision press brake is a compact machine for the production of small bent parts up to 40 in. Typical applications include sheet metal parts used in the production of vending machines and electrical equipment, as well as in the telecommunications and aerospace...

Continue Reading

Electromagnetic bending brake designed for light-duty forming - TheFabricator.com

Electromagnetic bending brake designed for light-duty forming

October 7, 2011

The Tennsmith electromagnetic brake from Trick Tools is designed without a full-length upper beam. This clamping system design eliminates typical interference points and incorporates only one moving part for light-duty forming. The machine comes with tooling for forming complex shapes,...

Continue Reading

Press brakes engineered for simple to complex heavy-bending applications - TheFabricator.com

Press brakes engineered for simple to complex heavy-bending applications

October 7, 2011

LVD Strippit offers a co-manufactured heavy-duty series of press brakes for simple to complex heavy bending applications. The machines are engineered and manufactured by LVD Co. and its joint-venture company LVD-HD. By offering a flexible approach to the configuration of the machine and using...

Continue Reading